Thread Content
1. Detachable: The detachable and closed cooling tower is easy to disassemble and assemble. It is extremely simple to remove scale. It can be removed and cleaned without affecting the tower body. If it is completely cleaned, it can be restored to a new state, thereby maintaining high operating efficiency. ； 2. Save water: The detachable closed tower increases the proportion of air convection heat transfer, and even in low-temperature seasons, direct dry air cooling can be achieved to reduce water loss. 3. Anti-icing: For extreme low temperatures, when the ambient temperature is below 0°C and the system is shut down suddenly, even if the system freezes, the pipe will not explode and the equipment will not be damaged. 4. Long life: The seals can be replaced every 5-10 years, and the cost is less than 10% of the cost of the entire tower. If this is repeated, it can be used for more than 20 years. The main heat exchanger frame is made of carbon steel plates with a thickness of more than 30mm. The pressing bolts are made of 304 stainless steel around M30. The nuts are made of brass and can be used unlimited times. 5. Energy saving: The heat exchange efficiency of corrugated plates is 5-8 times that of round tubes. The overall heat exchange efficiency is high, so it can save more than 50% of fan energy consumption. The spray water flow can be reduced to 30-40% of the circulating water volume, and the energy consumption of the water pump is also significantly reduced.