On the topic of \"Compilation of Standards for Corrosion Testing Methods of Metal Materials (Second Edition)\\"
Thread Content
On the topic of \"Compilation of Standards for Corrosion Testing Methods of Metal Materials (Second Edition)\": Book title: Compilation of Standards for Corrosion Testing Methods of Metal Materials (Second Edition); Author: Fifth Editing Department, China Standard Press; Publisher: China Standard Press; Publication date: November 2010. Introduction: The \"Compilation of Standards for Corrosion Testing Methods of Metal Materials (Second Edition)\") is a revised version of the original compilation of such standards. The content includes 61 **standards and 2 industry standards issued as of June 2010, which are divided into two categories: metals and alloys, and corrosion testing of metal coatings and steel materials. This book is suitable for technical personnel, engineering designers, and quality inspection staff in enterprises in the metallurgy industry and its downstream sectors, as well as for those involved in procurement, management, international trade, and foreign exchanges. I. Since the publication of this Standard Compilation, 6 standards have been revised and updated: GB/T 4334.6-2015 Test method for corrosion of stainless steel in 5% sulfuric acid (replacing GB/T 4334.6-2000); GB/T 4337-2015 Metallic materials – Fatigue testing – Rotational bending method (replacing GB/T 4337-2008); GB/T 8650-2015 Method for evaluating resistance to hydrogen-induced cracking in pipeline steels and pressure vessel steels (replacing GB/T 8650-2006); GB/T 10125-2012 Artificial atmosphere corrosion testing – Salt spray test (replacing GB/T 10125-1997); GB/T 16545-2015 Corrosion of metals and alloys – Removal of corrosion products from corrosion specimens (replacing GB/T 16545-1996); GB/T 17897-2016 Corrosion of metals and alloys – Test method for pitting corrosion of stainless steel in ferric chloride solution (replacing GB/T 17897-1999). II. To facilitate readers’ search, the author has listed the table of contents of the Standard Compilation of Test Methods for Corrosion of Metallic Materials (Second Edition) below.
This post was last edited by nj1952 on 2017-6-24 at 12:57. Table of Contents of “Compilation of Standards for Corrosion Testing Methods of Metal Materials (Second Edition)”
I. Corrosion Testing of Metals and Alloys, as Well as Metal Coatings
1. Comprehensive Corrosion Testing Methods
GB/T 10123-2001 Corrosion of metals and alloys – Basic terms and definitions
GB/T 12336-1990 Standard methods for statistical analysis of corrosion data
GB/T 16545-2015 Corrosion of metals and alloys – Removal of corrosion products from corrosion specimens
GB/T 18590-2001 Corrosion of metals and alloys – Methods for evaluating pitting corrosion
GB/T 19291-2003 Corrosion of metals and alloys – General principles for corrosion testing
GB/T 19746-2005 Corrosion of metals and alloys – Immersion test in saline solutions
GB/T 20854-2007 Corrosion of metals and alloys – Accelerated testing by cyclic exposure to salt spray, “dry” and “wet” conditions
GB/T 24195-2009 Corrosion of metals and alloys – Cyclic accelerated corrosion testing under acidic salt spray, “dry” and “wet” conditions
GB/T 24196-2009 Corrosion of metals and alloys – Electrochemical testing methods – Guidelines for potentiostatic and galvanostatic polarization measurements
2. Stress Corrosion Testing
GB/T 4157-2006 Laboratory tests for resistance of metals to special forms of environmental cracking in hydrogen sulfide environments
GB/T 15970.1-1995 Corrosion of metals and alloys – Stress corrosion testing – Part 1: General rules for testing methods
GB/T 15970.2-2000 Corrosion of metals and alloys – Stress corrosion testing – Part 2: Preparation and use of bent beam specimens
GB/T 15970.3-1995 Corrosion of metals and alloys – Stress corrosion testing – Part 3: Preparation and use of U-bent specimens
GB/T 15970.4-2000 Corrosion of metals and alloys – Stress corrosion testing – Part 4: Preparation and use of uniaxially loaded tensile specimens
GB/T 15970.5-1998 Corrosion of metals and alloys – Stress corrosion testing – Part 5: Preparation and use of C-ring specimens
GB/T 15970.6-2007 Corrosion of metals and alloys – Stress corrosion testing – Part 6: Preparation and use of precracked specimens under constant load or displacement
GB/T 15970.7-2000 Corrosion of metals and alloys – Stress corrosion testing – Part 7: Slow strain rate testing
GB/T 15970.8-2005 Corrosion of metals and alloys – Stress corrosion testing – Part 8: Preparation and use of welded specimens
GB/T 15970.9-2007 Corrosion of metals and alloys – Stress corrosion testing – Part 9: Preparation and use of precracked specimens under gradually increasing load or displacement
GB/T 20122-2006 Corrosion of metals and alloys – Evaluation of stress corrosion cracking using the drop evaporation test
GB/T 24518-2009 Corrosion of metals and alloys – Outdoor exposure test method for stress corrosion
YB/T 5344-2006 Test method for stress corrosion of iron-chromium-nickel alloys in hot water (formerly GB/T 10126-2002)
3. Corrosion Fatigue Testing
GB/T 4337-2015 Metallic materials – Fatigue testing – Rotating bend method
GB/T 20120.1-2006 Corrosion of metals and alloys – Corrosion fatigue testing – Part 1: Cyclic failure testing
GB/T 20120.2-2006 Corrosion of metals and alloys – Corrosion fatigue testing – Part 2: Crack growth testing of precracked specimens
4. Corrosion Testing in Atmospheric Environments
GB/T 14165-2008 Metals and alloys – Atmospheric corrosion testing – General requirements for field tests
GB/T 19292.1-2003 Corrosion of metals and alloys – Atmospheric corrosivity – Classification
GB/T 19292.2-2003 Corrosion of metals and alloys – Atmospheric corrosivity – Guideline values for corrosion grades
GB/T 19292.3-2003 Corrosion of metals and alloys – Atmospheric corrosivity – Measurement of pollutants
GB/T 19292.4-2003 Corrosion of metals and alloys – Atmospheric corrosivity – Determination of corrosion rates of standard specimens used for evaluating corrosivity
GB/T 19747-2005 Corrosion of metals and alloys – Bimetallic outdoor exposure corrosion testing
GB/T 20852-2007 Corrosion of metals and alloys – Guidelines for selecting methods of atmospheric corrosion protection
GB/T 24513.1-2009 Corrosion of metals and alloys – Classification of low corrosivity in indoor atmospheres – Part 1: Determination and evaluation of indoor atmospheric corrosivity
GB/T 24513.2-2010 Corrosion of metals and alloys – Classification of low corrosivity in indoor atmospheres – Part 2: Determination of indoor atmospheric corrosivity
GB/T 24513.3-2012 Corrosion of metals and alloys – Classification of low corrosivity in indoor atmospheres – Part 3: Determination of environmental parameters affecting indoor atmospheric corrosivity
GB/T 24516.1-2009 Corrosion of metals and alloys – Atmospheric corrosion – Methods for observing surface meteorological factors
GB/T 24516.2-2009 Corrosion of metals and alloys – Atmospheric corrosion – Method for tracking solar exposure
GB/T 24517-2009 Corrosion of metals and alloys – Outdoor cyclic spray exposure test method
GB/T 25834-2010 Corrosion of metals and alloys – Accelerated outdoor atmospheric corrosion testing of steel
I. Corrosion Testing of Metals and Alloys, as Well as Metal Coatings
1. Comprehensive Corrosion Testing Methods
GB/T 10123-2001 Corrosion of metals and alloys – Basic terms and definitions
GB/T 12336-1990 Standard methods for statistical analysis of corrosion data
GB/T 16545-2015 Corrosion of metals and alloys – Removal of corrosion products from corrosion specimens
GB/T 18590-2001 Corrosion of metals and alloys – Methods for evaluating pitting corrosion
GB/T 19291-2003 Corrosion of metals and alloys – General principles for corrosion testing
GB/T 19746-2005 Corrosion of metals and alloys – Immersion test in saline solutions
GB/T 20854-2007 Corrosion of metals and alloys – Accelerated testing by cyclic exposure to salt spray, “dry” and “wet” conditions
GB/T 24195-2009 Corrosion of metals and alloys – Cyclic accelerated corrosion testing under acidic salt spray, “dry” and “wet” conditions
GB/T 24196-2009 Corrosion of metals and alloys – Electrochemical testing methods – Guidelines for potentiostatic and galvanostatic polarization measurements
2. Stress Corrosion Testing
GB/T 4157-2006 Laboratory tests for resistance of metals to special forms of environmental cracking in hydrogen sulfide environments
GB/T 15970.1-1995 Corrosion of metals and alloys – Stress corrosion testing – Part 1: General rules for testing methods
GB/T 15970.2-2000 Corrosion of metals and alloys – Stress corrosion testing – Part 2: Preparation and use of bent beam specimens
GB/T 15970.3-1995 Corrosion of metals and alloys – Stress corrosion testing – Part 3: Preparation and use of U-bent specimens
GB/T 15970.4-2000 Corrosion of metals and alloys – Stress corrosion testing – Part 4: Preparation and use of uniaxially loaded tensile specimens
GB/T 15970.5-1998 Corrosion of metals and alloys – Stress corrosion testing – Part 5: Preparation and use of C-ring specimens
GB/T 15970.6-2007 Corrosion of metals and alloys – Stress corrosion testing – Part 6: Preparation and use of precracked specimens under constant load or displacement
GB/T 15970.7-2000 Corrosion of metals and alloys – Stress corrosion testing – Part 7: Slow strain rate testing
GB/T 15970.8-2005 Corrosion of metals and alloys – Stress corrosion testing – Part 8: Preparation and use of welded specimens
GB/T 15970.9-2007 Corrosion of metals and alloys – Stress corrosion testing – Part 9: Preparation and use of precracked specimens under gradually increasing load or displacement
GB/T 20122-2006 Corrosion of metals and alloys – Evaluation of stress corrosion cracking using the drop evaporation test
GB/T 24518-2009 Corrosion of metals and alloys – Outdoor exposure test method for stress corrosion
YB/T 5344-2006 Test method for stress corrosion of iron-chromium-nickel alloys in hot water (formerly GB/T 10126-2002)
3. Corrosion Fatigue Testing
GB/T 4337-2015 Metallic materials – Fatigue testing – Rotating bend method
GB/T 20120.1-2006 Corrosion of metals and alloys – Corrosion fatigue testing – Part 1: Cyclic failure testing
GB/T 20120.2-2006 Corrosion of metals and alloys – Corrosion fatigue testing – Part 2: Crack growth testing of precracked specimens
4. Corrosion Testing in Atmospheric Environments
GB/T 14165-2008 Metals and alloys – Atmospheric corrosion testing – General requirements for field tests
GB/T 19292.1-2003 Corrosion of metals and alloys – Atmospheric corrosivity – Classification
GB/T 19292.2-2003 Corrosion of metals and alloys – Atmospheric corrosivity – Guideline values for corrosion grades
GB/T 19292.3-2003 Corrosion of metals and alloys – Atmospheric corrosivity – Measurement of pollutants
GB/T 19292.4-2003 Corrosion of metals and alloys – Atmospheric corrosivity – Determination of corrosion rates of standard specimens used for evaluating corrosivity
GB/T 19747-2005 Corrosion of metals and alloys – Bimetallic outdoor exposure corrosion testing
GB/T 20852-2007 Corrosion of metals and alloys – Guidelines for selecting methods of atmospheric corrosion protection
GB/T 24513.1-2009 Corrosion of metals and alloys – Classification of low corrosivity in indoor atmospheres – Part 1: Determination and evaluation of indoor atmospheric corrosivity
GB/T 24513.2-2010 Corrosion of metals and alloys – Classification of low corrosivity in indoor atmospheres – Part 2: Determination of indoor atmospheric corrosivity
GB/T 24513.3-2012 Corrosion of metals and alloys – Classification of low corrosivity in indoor atmospheres – Part 3: Determination of environmental parameters affecting indoor atmospheric corrosivity
GB/T 24516.1-2009 Corrosion of metals and alloys – Atmospheric corrosion – Methods for observing surface meteorological factors
GB/T 24516.2-2009 Corrosion of metals and alloys – Atmospheric corrosion – Method for tracking solar exposure
GB/T 24517-2009 Corrosion of metals and alloys – Outdoor cyclic spray exposure test method
GB/T 25834-2010 Corrosion of metals and alloys – Accelerated outdoor atmospheric corrosion testing of steel
The last edit to this post was made by nj1952 on 2017-6-24 at 12:59.
5. Corrosion tests in artificial atmospheres
GB/T 10125-2012 – Corrosion tests in artificial atmospheres; Salt spray test
GB/T 14293-1998 – Corrosion tests in artificial atmospheres; General requirements
GB/T 19745-2005 – Corrosion tests in artificially low-concentration polluted atmospheres
GB/T 20121-2006 – Corrosion of metals and alloys; Corrosion tests in artificial atmospheres; Accelerated outdoor test under intermittent salt spray (scab test)
GB/T 20853-2007 – Corrosion of metals and alloys; Corrosion in artificial atmospheres; Accelerated corrosion test under conditions of intermittent spraying of salt solution and controlled humid cycles
6. Corrosion tests in marine environments
GB/T 5776-2005 – Corrosion of metals and alloys; Guidelines for exposing and evaluating metals and alloys in surface seawater
GB/T 6384-2008 – Methods for testing the seawater corrosion of metal materials used in ships and offshore engineering in natural environments
GB/T 12466-1990 – Terms related to corrosion and protection in ships and offshore engineering
GB/T 15748-1995 – Methods for testing galvanic corrosion of marine metal materials
7. Corrosion tests of metal coatings
GB/T 6461-2002 – Evaluation of specimens and parts with metal and other inorganic coatings on metal substrates after corrosion tests
GB/T 6465-2008 – Metal and other inorganic coatings; Corrosion test using corrosion paste (CORR test)
GB/T 6466-2008 – Electrodeposited chromium layers; Electrolytic corrosion test (EC test)
GB/T 9789-2008 – Metal and other inorganic coatings; Sulfur dioxide corrosion test under normal dew conditions
GB/T 11377-2005 – General rules for corrosion tests under storage conditions
II. Corrosion tests of steel materials
GB/T 4334-2008 – Corrosion of metals and alloys; Methods for testing intergranular corrosion of stainless steel
GB/T 4334.6-2015 – Methods for testing corrosion of stainless steel in 5% sulfuric acid
GB/T 10127-2002 – Methods for testing crevice corrosion of stainless steel in ferric chloride
GB/T 13671-1992 – Electrochemical methods for testing crevice corrosion of stainless steel
GB/T 15260-2016 – Corrosion of metals and alloys; Methods for testing intergranular corrosion of nickel alloys
GB/T 17897-2016 – Corrosion of metals and alloys; Methods for testing pitting corrosion of stainless steel in ferric chloride
GB/T 17899-1999 – Methods for measuring pitting potential of stainless steel
GB/T 31935-2015 – Corrosion of metals and alloys; Methods for testing intergranular corrosion of low-chromium ferritic stainless steel
GB/T 32550-2016 – Corrosion of metals and alloys; Determination of critical pitting temperature under constant potential control
GB/T 32571-2016 – Corrosion of metals and alloys; Methods for testing intergranular corrosion of high-chromium ferritic stainless steel
YB/T 5362-2006 – Methods for testing stress corrosion of stainless steel in boiling magnesium chloride solution (formerly GB/T 17898-1999)
GB/T 8650-2015 – Methods for evaluating resistance to hydrogen-induced cracking in pipeline steel and pressure vessel steel
GB/T 13303-1991 – Methods for determining the oxidation resistance of steel
GB/T 13448-2006 – Test methods for colored coated steel sheets and strips
GB/T 22316-2008 – Methods for testing the corrosion resistance of tin-plated steel sheets
5. Corrosion tests in artificial atmospheres
GB/T 10125-2012 – Corrosion tests in artificial atmospheres; Salt spray test
GB/T 14293-1998 – Corrosion tests in artificial atmospheres; General requirements
GB/T 19745-2005 – Corrosion tests in artificially low-concentration polluted atmospheres
GB/T 20121-2006 – Corrosion of metals and alloys; Corrosion tests in artificial atmospheres; Accelerated outdoor test under intermittent salt spray (scab test)
GB/T 20853-2007 – Corrosion of metals and alloys; Corrosion in artificial atmospheres; Accelerated corrosion test under conditions of intermittent spraying of salt solution and controlled humid cycles
6. Corrosion tests in marine environments
GB/T 5776-2005 – Corrosion of metals and alloys; Guidelines for exposing and evaluating metals and alloys in surface seawater
GB/T 6384-2008 – Methods for testing the seawater corrosion of metal materials used in ships and offshore engineering in natural environments
GB/T 12466-1990 – Terms related to corrosion and protection in ships and offshore engineering
GB/T 15748-1995 – Methods for testing galvanic corrosion of marine metal materials
7. Corrosion tests of metal coatings
GB/T 6461-2002 – Evaluation of specimens and parts with metal and other inorganic coatings on metal substrates after corrosion tests
GB/T 6465-2008 – Metal and other inorganic coatings; Corrosion test using corrosion paste (CORR test)
GB/T 6466-2008 – Electrodeposited chromium layers; Electrolytic corrosion test (EC test)
GB/T 9789-2008 – Metal and other inorganic coatings; Sulfur dioxide corrosion test under normal dew conditions
GB/T 11377-2005 – General rules for corrosion tests under storage conditions
II. Corrosion tests of steel materials
GB/T 4334-2008 – Corrosion of metals and alloys; Methods for testing intergranular corrosion of stainless steel
GB/T 4334.6-2015 – Methods for testing corrosion of stainless steel in 5% sulfuric acid
GB/T 10127-2002 – Methods for testing crevice corrosion of stainless steel in ferric chloride
GB/T 13671-1992 – Electrochemical methods for testing crevice corrosion of stainless steel
GB/T 15260-2016 – Corrosion of metals and alloys; Methods for testing intergranular corrosion of nickel alloys
GB/T 17897-2016 – Corrosion of metals and alloys; Methods for testing pitting corrosion of stainless steel in ferric chloride
GB/T 17899-1999 – Methods for measuring pitting potential of stainless steel
GB/T 31935-2015 – Corrosion of metals and alloys; Methods for testing intergranular corrosion of low-chromium ferritic stainless steel
GB/T 32550-2016 – Corrosion of metals and alloys; Determination of critical pitting temperature under constant potential control
GB/T 32571-2016 – Corrosion of metals and alloys; Methods for testing intergranular corrosion of high-chromium ferritic stainless steel
YB/T 5362-2006 – Methods for testing stress corrosion of stainless steel in boiling magnesium chloride solution (formerly GB/T 17898-1999)
GB/T 8650-2015 – Methods for evaluating resistance to hydrogen-induced cracking in pipeline steel and pressure vessel steel
GB/T 13303-1991 – Methods for determining the oxidation resistance of steel
GB/T 13448-2006 – Test methods for colored coated steel sheets and strips
GB/T 22316-2008 – Methods for testing the corrosion resistance of tin-plated steel sheets