On the topic of \"Compilation of Stainless Steel Standards (3rd Edition)\\"

2017-06-24View Original

Thread Content

On the topic of \"Compilation of Stainless Steel Standards (Third Edition)\": Book title: Compilation of Stainless Steel Standards (Third Edition); Author: Institute of Metal Standardization, Metallurgical Industry Information and Standard Research Institute; Publisher: China Standards Press; Publication date: August 2012. Overview: This compilation gathers a total of 47 stainless steel standards published up to the end of July 2009, including 37 national standards and 10 metallurgical industry standards. I. Since the publication of this Standard Compilation, 9 standards have been revised; for details, see the table of contents: GB/T 706-2016 Hot-rolled section steel (replacing GB/T 706-2008); GB/T 3280-2015 Cold-rolled stainless steel sheets and strips (replacing GB/T 3280-2007); GB/T 4226-2009 Stainless steel bars processed by cold working (replacing GB/T 4226-1984); GB/T 4237-2015 Hot-rolled stainless steel sheets and strips (replacing GB/T 4237-2007); GB/T 9944-2015 Stainless steel wires and ropes (replacing GB/T 9944-2002); GB/T 13296-2013 Seamless stainless steel tubes for use in boilers and heat exchangers (replacing GB/T 13296-2007); GB/T 14975-2012 Seamless stainless steel tubes for structural use (replacing GB/T 14975-2002); GB/T 14976-2012 Seamless stainless steel tubes for fluid transport (replacing GB/T 14976-2002); GB/T 15391-2010 Dimensions, shapes, and allowable tolerances for cold-rolled steel strips with a width of less than 600 mm (replacing GB/T 15391-1994). II. To facilitate readers’ search, the author has attached the table of contents of the Standard Compilation for Stainless Steel (Third Edition) below.

Reply #22017-06-24

Table of Contents of “Compilation of Stainless Steel Standards (3rd Edition)”
I. Basic Standards
GB/T 342-1997 Dimensions, shapes, weights, and allowable tolerances of cold-drawn round wires, square wires, and hexagonal wires
GB/T 702-2008 Dimensions, shapes, weights, and allowable tolerances of hot-rolled steel bars
GB/T 706-2016 Hot-rolled sections
GB/T 708-2006 Dimensions, shapes, weights, and allowable tolerances of cold-rolled steel sheets and strips
GB/T 709-2006 Dimensions, shapes, weights, and allowable tolerances of hot-rolled steel sheets and strips
GB/T 905-1994 Dimensions, shapes, weights, and allowable tolerances of cold-drawn round bars, square bars, and hexagonal bars
GB/T 908-2008 Dimensions, shapes, weights, and allowable tolerances of forged steel bars
GB/T 6723-2008 Dimensions, shapes, weights, and allowable tolerances of general-purpose cold-formed open sections
GB/T 6728-2002 Dimensions, shapes, weights, and allowable tolerances of cold-formed hollow sections for structural use
GB/T 14981-2009 Dimensions, shapes, weights, and allowable tolerances of hot-rolled wire rods
GB/T 15391-2010 Dimensions, shapes, and allowable tolerances of cold-rolled steel strips with a width of less than 600 mm
GB/T 17395-2008 Dimensions, shapes, weights, and allowable tolerances of seamless steel pipes
GB/T 20878-2007 Grades and chemical compositions of stainless steels and heat-resistant steels
YB/T 4171-2008 Copper-containing antibacterial stainless steels

II. Steel Sheets and Strips
GB/T 3280-2015 Cold-rolled stainless steel sheets and strips
GB/T 4237-2015 Hot-rolled stainless steel sheets and strips
GB/T 4239-1991 Cold-rolled strips of stainless steels and heat-resistant steels
GB/T 8165-2008 Stainless steel composite sheets and strips
GB/T 8546-2007 Titanium-stainless steel composite sheets
GB/T 13148-2008 Welding technical requirements for stainless steel composite sheets
GB/T 21074-2007 Precision cold-rolled stainless steel strips for syringe needles
GB 24511-2009 Stainless steel sheets and strips for pressure-bearing equipment
YB/T 085-2007 Cold-rolled stainless steel strips for magnetic heads
YB/T 110-2011 Cold-rolled stainless steel strips for springs in color cathode-ray tubes
YB/T 5090-1993 Hot-rolled stainless steel strips
YB/T 5133-2007 Cold-rolled stainless steel strips for watches
YB/T 5310-2010 Cold-rolled stainless steel strips for springs

III. Steel Pipes
GB/T 3089-2008 Ultra-thin-walled seamless stainless steel pipes
GB/T 3090-2000 Small-diameter seamless stainless steel pipes
GB/T 12770-2002 Welded stainless steel pipes for mechanical structures
GB/T 12771-2008 Welded stainless steel pipes for fluid transportation
GB/T 13296-2013 Seamless stainless steel pipes for boilers and heat exchangers
GB/T 14975-2012 Seamless stainless steel pipes for structural use
GB/T 14976-2012 Seamless stainless steel pipes for fluid transportation
GB/T 18704-2008 Stainless steel composite pipes for structural use
GB/T 24593-2009 Welded austenitic stainless steel pipes for boilers and heat exchangers
YB/T 4204-2009 Welded stainless steel pipes for water supply
YB/T 4205-2009 Austenitic stainless steel U-shaped seamless pipes for water heaters
YB/T 4223-2010 Welded austenitic stainless steel pipes for water heaters
YB/T 5307-2006 S-shaped brazed stainless steel flexible hoses (formerly GB 3642-1983)
YB/T 5363-2006 Welded stainless steel pipes for decorative purposes (formerly GB/T 18705-2002)

IV. Wires and Ropes
GB/T 4232-2009 Stainless steel wires for cold heading
GB/T 4240-2009 Stainless steel wires
GB/T 9944-2015 Stainless steel ropes
GB/T 24588-2009 Stainless steel spring wires
YB/T 096-1997 High-carbon chromium stainless steel wires
YB/T 5091-1993 Stainless steel bars and wires for inert gas shielded welding
YB/T 5092-2005 Stainless steel wires for welding

V. Sections
GB/T 1220-2007 Stainless steel bars
GB/T 1221-2007 Heat-resistant steel bars
GB/T 4226-2009 Cold-worked stainless steel bars
GB 4234-2003 Stainless steel for surgical implants
GB/T 4241-2006 Stainless steel wire rods for welding
GB/T 4356-2002 Stainless steel wire rods
YB/T 2008-2007 Billets for seamless stainless steel pipes
YB/T 5089-2007 Stainless steel billets for forgings
YB/T 5134-2007 Stainless steel flat bars for watches
YB/T 5250-1993 (confirmed in 2005) Non-magnetic stainless steel 0Cr16Ni14 for electron vacuum devices
YB/T 5309-2006 Hot-rolled equilateral angle steel of stainless steel (formerly GB/T 4227-1984)

Reply #32017-06-25

Is there only a directory and no resources? I give the original poster 9 points; I don’t give a full score for fear you might get proud

Reply #42017-07-04

Why was it published in 2012, when there was already the standard GB/T 9944-2015 for stainless steel wire ropes from 2015?

Reply #52017-07-04

This post was last edited by nj1952 on 2017-7-4 at 17:25. The author compiled the table of contents of the 2012 edition of the \"Stainless Steel Standards Compilation\"; all standards listed here are valid ones

Reply #62019-05-08

:victory::victory:

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.

On the topic of \"Compilation of Stainless Steel Standards (3rd Edition)\\"

Thread Content

Related Threads in This Forum

← Previous

Next →

Submit a Project

Disclaimer

Quick Links