Thread Content
What level is this quality of circulating water considered to be in forums? The image shows the sludge removed from the cooler.
It is estimated that this was removed from the cooler tube bundle
The silt removed from the water cooler indicates that there is a considerable amount of sediment in the circulating water, which shows that there are still issues with the management of our circulating water system. The sediment in the circulating water tower tanks should be removed regularly. Regularly inspect the filtration system for circulating water. The area around the circulating water tower should be enclosed to prevent dust from entering the tower.
Generally, filters are installed in the equipment for regular switching and flushing – don’t you have any such filters there? Moreover, the circulating water must also be sampled and analyzed regularly to prevent internal leaks in the heat exchanger from contaminating the water quality.
There are problems with circulating water management; everyone is aware of these issues, but no one takes practical action to address them (significant efforts are required in terms of manpower, financial resources, and materials, and there are many difficulties in actual implementation). As a user of circulating water, I can only report these problems to the relevant departments.
There is no filter for the device when it is connected here
First, the quality of the water entering the circulating water system is poor; there are particles such as sand and gravel, which suggests that it hasn’t been filtered, or perhaps the circulating water system hasn’t been cleaned; Secondly, during the maintenance of the circulating water system, no bypass filter was installed or put into use, and the turbidity of the circulating water was not reduced ; Third, the users of circulating water should regularly clean the circulating water side to improve heat exchange efficiency ;
It’s just like our circulating water; well, there’s nothing to say.
Sidestream filtration, regular sludge discharge, sediment removal, dust prevention