HYSYS simulation of the coil heating process in a water tank
Thread Content
The problem is as follows: There is a water tank with a volume of 10 cubic meters, filled with water at a constant temperature of 80 degrees Celsius. Coils are installed inside the tank, and air is passed through these coils; the air flows continuously and is heated by the water in the tank (the air flow rate and the temperature after heating can be assumed arbitrarily). How can a model for such a problem be created in HYSYS?
Which parameters does LZ want to simulate? Is it to simulate the fluid volume required for heating to a steady state, a dynamic process, or the flow field within the tank (which Hysys cannot do)? Ask clear questions.
What is intended is to create a dynamic simulation: a tank filled with water, equipped with a heating source on the outside to maintain a constant temperature of the water inside. Inside the tank there is a coil, through which cold air passes and is heated to a certain temperature. I want to simulate this process to see what effect changes in the air flow rate and temperature entering the coil have on the temperature after heating