What are the reasons why the piston support of a reciprocating compressor wears out quickly and how to improve it?
Thread Content
What are the reasons why the piston support of a reciprocating compressor wears out quickly and how to improve it?
Pay attention to the oil injection amount, oil quality monitoring, installation quality of the support, and material quality! Monitor normal operation and fill in the operation records! Prevent large fluctuations in working conditions
On the premise of ensuring installation as required, the process parameter conditions of the equipment are guaranteed. As for the issue of Towa's vulnerability alone, a comprehensive inspection and measurement should be carried out. For example, the foundation bolts, the levelness of the rotor, the bearing gap, the measurement of interference (pressure), whether the oil injection pipeline is smooth, whether the support pad is installed in the wrong direction, the oil injection hole is blocked, and the bearing bush is installed incorrectly. These two possibilities are high. (for reference)
Think about the liquid-carrying aspect, the medium is coke oven gas
Is there any possibility of acidic corrosion in the coke oven gas medium if it contains liquid?
I don’t think you can analyze the imbalance of the rotor dynamic balance of your equipment, right? Are you testing me? ? I am past retirement age, so I am just participating to help you with your analysis, for reference. . . . well. . . .
I am almost reaching retirement age. I don’t want to live to be the youngest person.
Analyze specific issues in detail. What you said is too general. There are too many reasons: For example, the material and media are dirty, the amount of oil injection is insufficient, the oil injection is dirty, the mirror surface level is not good, etc.