Everyone, help figure out what this is
Thread Content
Taken inside the tower – what is the purpose of that small elbow pipe under the swirl plate, and what is its name? It wasn’t found either on the drawings of the tower equipment···
The liquid seal serves, on one hand, to drain liquid, and on the other hand, to maintain a certain liquid level – i.e., a liquid seal – to prevent gas from escaping directly through the drainage pipe
Do you still need to add fluid when driving the original vehicle?
A liquid seal is formed during normal operation to prevent gas from escaping directly without passing through the baffle for separation. It should be a component inside the scrubber tower.
We use cyclone separators, which have a different structure. It's better to have a rough diagram.
In normal driving conditions, there is usually a level indicator. If it is merely a drainage port, then there is no need to monitor the level, as it is controlled by valves