How is electric heating typically implemented for sulfuric acid storage tanks?
Thread Content
How is electric heating typically implemented for sulfuric acid storage tanks?
Why does this tank need to be heated? The concentration can be adjusted so that it doesn’t freeze
An electric heating tape with a power consumption of 15 watts per meter is used on the outside of the cylinder
Generally, how many meters of heating is required? Are there any principles or experiences to follow?
The plan must be developed based on the installation orientation of the tank; if it is in the north, it is necessary to take into account the lowest weather conditions as well as the freezing point of the medium at its respective concentration. To determine the heat tracing temperature.
Please let me know the location of the equipment and its size
Horizontal, φ2600×6600(TL), V=40m3. Gansu
Wrap the electric heating tape three times around the top of the storage tank’s saddle, with a spacing of 300 mm between each section of the tape. If the sulfuric acid tank is not insulated, it is recommended to keep the room temperature at 10 degrees Celsius, and use polyurethane for on-site insulation with a thickness of 60–80 mm
It is recommended to use steam or hot water for heating; electric heating elements have a relatively short lifespan and high energy consumption, with a lifespan of roughly three to four years.
If the steam or hot water is located far away, electric heating is a more reliable option.