On the issue of increasing evaporation volume through triple-effect evaporation
Thread Content
Currently, there is a three-effect evaporation unit: the temperature in the first effect is around 83°C with a negative pressure of -0.06 Mpa; the temperature in the second effect is around 70°C with a negative pressure of -0.08 Mpa; and the temperature in the third effect is around 43°C with a negative pressure of -0.094 Mpa. Is it possible to control the temperature of the triple effect to raise it, thereby increasing the evaporation rate?
Increase the steam flow, and the processing capacity will automatically rise
If your heat exchange area is around 60 square meters, your processing capacity per hour is likely to be around 5 tons!