Superheated steam gas exchange

Thread Content

Consultation on steam-air heaters 1. Design conditions: Location – Linyi, Shandong. One steam-air heater is to be installed outdoors, with the following design conditions:

| Serial No. | Parameter | Condition 1 | Condition 2 | Remarks |
|-------------|-----------|--------------|--------------|---------|
| 1 | Inlet air flow rate, Nm3/h | 38,000 | 10,000 | Volume at standard conditions |
| 2 | Inlet air temperature, °C | 215 | 215 | |
| 3 | Inlet air pressure, kPa | 3 | 3 | |
| 4 | Outlet air temperature, °C | 460 | 450 | |
| 5 | Air-side resistance, Pa | | | |
| 6 | Steam flow rate, t/h | | | |
| 7 | Inlet steam temperature, °C | 525 | 520 | Normal operating temperature |
| 8 | Inlet steam pressure, MPa.a | 2.5 | 1.60 | |
| 9 | Outlet steam temperature, °C | 275–290 | 275–290 | Temperature difference: ~60°C |
| 10 | Steam-side resistance, MPa | | | |

Requirements:
1) Technical solution (heater configuration, materials, etc.)
2) Technical parameters (heat exchange area, resistance, load, etc.)
3) Diagrams of the equipment’s appearance and layout requirements
4) Preliminary quotation: 15117987627