For the same processing volume Q, what are the advantages of series adsorption compared to parallel adsorption mode for two towers (with the same adsorbent)?
Thread Content
For the same processing volume Q, compared to the parallel adsorption mode (2 towers, with Q per tower) and the series adsorption mode (2 towers, each with Q), what are the advantages of series adsorption?
When there is an excess of absorbent, series connection is beneficial for absorption; when there is less absorbent, parallel connection is beneficial for absorption.
Series connection of adsorption towers is suitable for process environments that require a high concentration of the product gas, while parallel connection of adsorption towers is appropriate for processes that require a large volume of gas to be processed
Series resistance is high, requiring high pressure and resulting in high energy consumption. Large fluctuations
Based on the topic, it is about adsorption; so it should be the adsorption of organic compounds in the gas phase components? If so, various parameters such as the flow rate of adsorption, the concentration of organic matter, the thickness of the penetration zone, and the treatment requirements need to be considered. Otherwise, it is difficult to make a judgment. Generally speaking, within the range where the flow rate can be controlled, series connection yields a greater adsorption capacity, while parallel connection results in lower wind resistance.
Why does series connection result in a greater adsorption capacity?
The adsorption effect is better, and the service life of the adsorbent is extended
Series adsorption requires a larger dosage; the higher the purity of the treated product gas. Parallel adsorbents have a larger effective adsorption surface area, allowing them to treat more raw gas
The principle of voltage division in parallel circuits is similar to that of current sharing in series circuits. When the amount of raw material to be processed is large, it is recommended to use multiple adsorption towers in parallel to share the load and reduce the burden on each tower, thereby ensuring efficient adsorption. When the impurity content in the raw material is high, it is recommended to use multiple adsorption towers in series, increase the height of the adsorbent bed, prolong the residence time of impurities in the adsorbent bed, and reduce the operating space velocity to ensure the accuracy of adsorption.
I have set the condition of an equal stay time