Spherical tank column measurement plate
Thread Content
In accordance with Article B.10 of the Standard for Steel Spherical Storage Tanks (GB12337-2014), a settlement measurement plate shall be welded to each pillar of the spherical tank, and at the same height. What does the measuring plate on the column look like, and what is the welding height?
The column gauge plate of a spherical tank is usually a small flat plate welded to the pillar, used to measure the settlement of the storage tank. According to the GB12337-2014 standard, these testing plates need to be welded to each pillar at the same height. The specific welding height should be determined based on the design documents and project requirements; the standard itself does not specify a particular value for the welding height. When welding, it is also necessary to consider ensuring the convenience and accuracy of measurements. .
:handshake thank you