Is there any solution for the handover of mass flow meters used for loading fuel oil?
Thread Content
Our company wants to switch to using mass flow meters for the loading of fuel oil, with the aim of reducing the workload associated with weighing and improving efficiency. Is there such a design solution? What type of mass flow meter would be suitable, and what valves would work well in combination with a batch controller for accurate quantification during loading? The flow rate is around 120 tons per hour; the fuel oil is similar to 120# and 180# fuel oil, and the temperature is around 50 degrees. Thank you
The refinery of Daqing Petrochemical Company uses mass flow meters for measurement. For specific details, you can consult the Metering Center of the Refinery at Daqing Petrochemical Company.
Thanks, we’re in Zhejiang and we don’t know those people well either :L
It’s best to find a complete set of designs and purchase products of good quality. If the design is poor, it might be blamed on the use of a substandard mass flow meter. It is best to choose Rosemount or Yokogawa mass flow meters
Weighbridges use static measurement; their theoretical precision is at the ten-thousandth level, with little additional error. Flow meters perform dynamic measurement, with a theoretical accuracy of the thousandth level; moreover, this theoretical accuracy does not take into account errors that occur at low flow rates. There are so many flowmeters used for small-signal rejection – do you know why not? Because, as their dogs say, they aren’t capable of measuring accurately; since they can’t do it properly, they cut off the tail completely. Then they pretend to be a woman, trying to deceive you and trick you into having sex with them. Hehe, get it? So, the gauge has a nominal accuracy of 0.1%; do you really have the capability to achieve that level of accuracy? – It’s a serious issue. Wish you great skills and good luck :lol
The overall design for batch controllers, flow meters, and control valves is quite simple; if you have the money, opt for imported ones.
If you need it, I can design one set for you!
Batch controllers, mass flow meters, two-stage valves, anti-static and anti-spill devices can be configured as required
It can be used. For this application in trade measurement, a high-precision mass flow meter is required; the installation requirements are quite strict. It’s best to consult the flow meter manufacturer before finalizing the plan
It turns out that I worked on two fuel oil loading operations at a refinery belonging to a state-owned enterprise; the temperature was over 100 degrees. Those who are available for contact can get in touch!