What does it mean to use the motor’s operation signal as the start signal for the oil pump?

2018-10-03View Original

Thread Content

What does it mean to use the motor’s operation signal as the start signal for the oil pump?

Reply #22018-10-03

Controlled by a start signal; overall, it’s not very precise, and the diagram may be incomplete

Reply #32018-10-04

The start-up of the pump interlocks is now complete

Reply #42018-10-08

This should be a DI signal; in other words, a normally open contact on the motor is used as a signal indicating that the motor has started. Once the motor starts, it means the pump is also in operation.

Reply #52018-10-09

When the main motor start signal is received, start the oil pump； Stop the oil pump after the main motor stops operating and the unit startup enable is disabled for 30 seconds

Reply #62018-10-15

The operation of the motor is contingent on the startup of the oil pump.

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.

Quick Links