Settings for the AVP300 locator
Thread Content
For the forward and reverse operation of the AVP300 locator, in addition to changing the forward and reverse operation of the AO in the PLC or DCS, can it also be achieved by altering the settings of the locator itself?
Yes, but it can be modified only using a specialized Japanese controller. Under normal circumstances, it will be set according to your requirements at the time of production.
The single-button knob serves as a switch for switching between manual and automatic mode; the UP and DOWN buttons are used to control the valve position, or can be held down during self-tuning. In manual mode, UP and DOWN can be used to adjust the valve position.
Model 300 belongs to the DE protocol without a feedback signal; it requires the use of an SFC operator to configure communication and adjust the feedback.