Function of the paperless recorder for air separation compressors
Thread Content
I need guidance on the function of the LogMessage LM5000 recorder; it is connected to temperature sensors – is it an input or an output device? It’s still used for compensation, I don’t understand
Is the output of LogMessage LM5000 sent to the pLC as well?
The LogMessage 5000 is a 16-channel data recorder that can accept RTD and thermocouple signals. It can be connected to other systems via RS485, TCP/IP, or CAN. Therefore: 1. Receive temperature signals for rapid sampling and recording, with a maximum rate of 8,000 samples per second ； 2. It can communicate with other systems, such as PLCs or higher-level software, to display trends. 3. In domestic power plants, the temperature data is usually fed into Bentley systems or the plant’s control systems for display and interlock purposes. This air separation unit should be large, use foreign-made machinery and control systems, and be equipped with LogMessage for temperature monitoring and fault analysis.