Control valve and level interlock
Thread Content
The control valve is interlocked with the liquid level; the liquid level range is 0-100 CM, and the control valve is used to maintain the liquid level at 50 CM. What should be set as the custom circuit range? How should the opening of the control valve be adjusted for 0-50CM or 0-100CM? That is, when the liquid level is at 0, the opening should still be very small – how do I set this? Please help everyone
What kind of system is this? It’s the simplest single-loop control system; settings can be made within the system itself, and then the loop can be adjusted to operate in automatic mode
I don’t understand what it means by customizing the loop range.
Newcomers really don’t quite understand it. Could you give some advice?
The range should be 0~100 cm; it needs to be determined whether the control valve operates in direct or reverse action, and then try setting P to 50%
The terms are not professional enough. It should be a “single-loop control system for liquid level” or a “single-loop regulation system for liquid level”; it cannot be called a “regulation valve and liquid level interlock”.