Zhejiang Zhongkong DCS JX300 network settings
Thread Content
There are three computers: one engineer station, and operation stations 131 and 132. Configurations can be sent to 131/132 via control networks A/B; the operation network can send configurations to 132, but not to 131. In the surveillance footage, when checking the operation records of tag number operations, only the operations performed on this computer are displayed
It’s really difficult to communicate with you. First, make sure that all the network settings on 131 are correct. Then, from 130 and 132, try accessing the LAN to see if 131 is still connected to the network. If it’s there, I guess you have the AB cables reversed. If not present, check the cables and switch ports.