Do the pressure gauges that come standard with skid-mounted equipment need to be sent for inspection in accordance with regulations regarding mandatory inspections?
Thread Content
Do the embedded pressure gauges that come standard with skid-mounted units, those that are installed together in groups, need to be sent for inspection every six months in accordance with the regulations regarding mandatory inspections?
In accordance with relevant regulations such as the Regulations on the Safety Supervision of Special Equipment and the Technical Supervision Rules for Pressure Vessels, embedded pressure gauges are classified as special equipment and are subject to mandatory inspection. Therefore, the pressure gauges included with the skid-mounted unit at the time of manufacture need to be sent for inspection at regular intervals in accordance with the regulations regarding mandatory inspections. The specific inspection frequency and requirements for submitting samples must be followed in accordance with the regulations of the local mandatory inspection authorities. .
Depending on whether the skid-mounted equipment is a special pressure equipment, and whether the pressure gauge is an accessory to a special pressure equipment pipeline, if so, it needs to be calibrated.
Equipment that falls within the scope of regulatory requirements must undergo inspections on a regular basis.
When regulations require testing, generally no one checks on it
Online technical exchanges and resource sharing