Macs v6.5.4 has communication issues; simulation cannot be downloaded
Thread Content
I am using a virtual network card with the IP address 128.0.0.80. When starting the simulation, it shows that control station number 10 has been activated and compilation is possible, but during the download process, an communication error is indicated. I checked the network and found no issues; reinstalling the software didn’t help either. I tried uninstalling it and then installing version 6.5.3, and simulation worked normally after that. Now my project files are in version 6.5.4, and I’m unable to carry out simulation or debugging. I suspect there’s a problem with the simulation controller; I hope everyone can help me.
It may be a software version issue causing incompatibility with the simulation controller. Try to create a new project in version 6.5.4 to test whether simulation can proceed normally, in order to rule out issues with the project files themselves. If the new project can be simulated properly, it may be necessary to recreate the project or convert the project file. If the problem persists, it is recommended to contact the software supplier for assistance, or try running the software in a different computer environment to see if there is any improvement. .