The slurry level in the tank is 80%; will there be any problems if the mixer is turned off briefly and then restarted?
Thread Content
The slurry level in the tank is 80%; will there be any problems if the mixer is turned off briefly and then restarted?
It’s best to install an inverter; that way there will be no problems
Generally, there’s no problem; it’s advisable to lower the liquid level slightly before restarting
The liquid level is a bit high; if possible, it is recommended to lower the level before taking a short shutdown, dealing with the issue afterward and then restarting to avoid any potential problems
There will be no problem in restarting after a short period of shutdown, as coal slurry possesses a certain degree of stability; additives are sometimes used for certain types of coal to enhance this stability. Otherwise, the water-coal slurry technology would not be chosen； But over time this becomes problematic; stability and liquidity decline, and stratification is very likely to occur ；