Why does the outlet pipeline of a reciprocating carbon dioxide compressor vibrate?
Thread Content
For the space furnace, there is vibration in the outlet pipeline of the reciprocating carbon dioxide compressor; for now, the only measure taken is to reinforce the pipeline. Does anyone know what the reason is?
There can be various reasons for the vibration in the outlet pipeline of a reciprocating carbon dioxide compressor. Here are some possible reasons: 1. Vibration of the compressor itself: During operation, the movement of components such as the piston and crankshaft in a reciprocating compressor can cause vibration. This vibration can be transmitted through the pipeline, causing the outlet pipeline to vibrate. 2. Gas pulsation: When a compressor compresses gas, the pressure and flow rate of the gas undergo periodic changes. Such gas pulsations may generate pressure waves in the pipeline, thereby causing vibration in the pipeline. 3. Improper pipeline installation: If the pipelines are not installed properly, for example if the brackets and fixing elements are too loose or too tight, it may cause vibrations in the pipelines during operation. 4. Vibration from other equipment: If there is other equipment nearby the compressor that generates vibration, this vibration can be transmitted to the pipelines through the floor or other structures, causing the pipelines to vibrate. Currently, reinforcing pipelines is a common solution. However, to completely resolve the issue, a thorough inspection of the compressor and piping system is required to identify the root cause of the vibration, and appropriate measures should be taken for repair. .
There are several reasons for vibration: 1. The compressor itself vibrates, and rigid connections cause the vibration to be transmitted; this transmission of vibration can be eliminated by using bellows expansion joints； 2. There are problems with the outlet check valve, which causes fluctuations in the gas pressure inside the outlet pipe; this leads to continuous compression and expansion and results in vibrations. The check valve needs to be repaired or replaced ； 3. Liquid is generated within the outlet pipeline; it may be water or some other substance. This liquid must be completely drained, and measures should be taken to prevent its reformation. This is just my personal opinion for reference only.