Hydrogen production converter
Thread Content
Can a natural gas-based hydrogen production converter use gas as the fuel gas for the converter? The calorific value of the gas is 1500 Kcal, with a pressure of 30 KPa ； Are there any special requirements for the nozzles of the converter?
The pressure is too low. If both the temperature and the flue gas meet the requirements, it can be used; the burners are more or less the same, as long as uneven burning does not occur.
The pressure is too low. If both the temperature and the flue gas meet the requirements, it can be used; the burners are more or less the same, as long as uneven burning does not occur.
Low pressure is easy to handle; just add a pressurization device (compressor, Roots blower) to the fuel gas pipe feeding the conversion furnace. Does increased pressure lead to greater wear on the burner and a shorter service life?
Low pressure is easy to handle; just add a pressurization device (compressor, Roots blower) to the fuel gas pipe feeding the conversion furnace. Does increased pressure lead to greater wear on the burner and a shorter service life?