[Q&A Question 128] 2018.05.08
Thread Content
This post was last edited by Green Lotus on 2018-5-8 at 11:36. [Q&A Question 128] 2018.05.08: Explain why the pressure behind the furnace gas control valve is very high and the furnace temperature fails to rise How to handle it? Reason: ① Changes in the properties of the gas, with an increase in light components and a decrease in calorific value ； ② Flame arrester clogged ； ③The amount of raw material is increased too quickly, while the gas supply cannot keep up. Treatment: ① Continue to increase the amount of gas fed into the furnace, and contact relevant parties to ensure the composition of the gas ； ② Replace the secondary line cleaning flame arrester ； ③ Increase the raw material input slowly, raising the temperature first before increasing the amount of raw material. (Unless otherwise specified, all questions and answers are based on hydrogenation units.) ) Correct: 3 wealth, Incorrect: 1 wealth ； Mass posting of posts – rated based on the lowest score ； Replies that are unrelated to the answer are considered spam and will be deleted immediately. For management purposes, if you need to view content from a few days ago, please go to https://bbs.hcbbs.com/home.php?mod=space&uid=3862647&do=thread&view=me&from=space through the summary post below. The APP short-video skills competition has started! https://bbs.hcbbs.com/forum.php?mod=viewthread&tid=1951670
① The properties of the gas change: the light components increase and the calorific value decreases； ② Flame arrester clogged ； ③The amount of raw material is increased too quickly, while the gas supply cannot keep up. Treatment: ① Continue to increase the amount of gas fed into the furnace, and contact relevant parties to ensure the composition of the gas ； ② Replace the secondary line cleaning flame arrester ； ③ Bring in the raw materials slowly; ask questions first before specifying the quantity.
The nozzle is likely clogged; remove it and clean it.
①? The properties of the gas change: light components increase while the calorific value decreases； ②?Flame arrester clogged ； ③The amount of raw material is increased too quickly, while the gas supply cannot keep up. Treatment: ①?Continue to increase the amount of gas fed into the furnace, and contact relevant parties to ensure the composition of the gas ； ②? Replace the secondary line cleaning flame arrester ； ③? The raw materials should be added slowly; ask questions first before determining the amount to add
①? The properties of the gas change: light components increase while the calorific value decreases； ②?Flame arrester clogged ； ③The amount of raw material is increased too quickly, while the gas supply cannot keep up. Treatment: ①?Continue to increase the amount of gas fed into the furnace, and contact relevant parties to ensure the composition of the gas ； ②? Replace the secondary line cleaning flame arrester ； ③? The raw materials should be added slowly; ask questions first before determining the amount to add.
Reason: ① Changes in the properties of the gas, with an increase in light components and a decrease in calorific value； ② Flame arrester clogged ； ③The amount of raw material is increased too quickly, while the gas supply cannot keep up. Treatment: ① Continue to increase the amount of gas fed into the furnace, and contact relevant parties to ensure the composition of the gas ； ② Replace the secondary line cleaning flame arrester ； ③ Increase the raw material input slowly, raising the temperature first before increasing the amount of raw material.
Reason: ① Changes in the properties of the gas, with an increase in light components and a decrease in calorific value； ② Flame arrester clogged ； ③The amount of raw material is increased too quickly, while the gas supply cannot keep up. Treatment: ① Continue to increase the amount of gas fed into the furnace, and contact relevant parties to ensure the composition of the gas ； ② Replace the secondary line cleaning flame arrester ； ③ Increase the raw material input slowly, first raise the temperature and then increase the amount of raw material
The pressure behind the furnace gas control valve is very high; what is the reason why the furnace temperature cannot rise? How to handle it? Reason: 1. Changes in the properties of the gas, with an increase in light components and a decrease in calorific value ； 2. Fire arrester blockage ； 3. The amount of raw material being fed in is increased too quickly, while the gas supply cannot keep up. Treatment: 1. Continue to increase the amount of gas fed into the furnace, and contact relevant parties to ensure the composition of the gas ； 2. Replace the secondary line cleaning flame arrester ； 3. Increase the raw material input slowly, raising the temperature first before increasing the amount of raw material.
1. Nozzle blockage； Solution: Clear the burner; 2. The calorific value of the fuel gas is low ； Treatment: Adjust the composition of the fuel gas by adding components with a high calorific value ； 3. The burner has low efficiency and is not well-matched ； Solution: Replace the burner
Reason: ① Changes in the properties of the gas, with an increase in light components and a decrease in calorific value； ②?Flame arrester clogged ； ③The amount of raw material is increased too quickly, while the gas supply cannot keep up. Treatment: ①?Continue to increase the amount of gas fed into the furnace, and contact relevant parties to ensure the composition of the gas ； ②? Replace the secondary line cleaning flame arrester ； ③? The raw materials should be added slowly; ask questions first before determining the amount to add.
Reason: ① Changes in the properties of the gas, with an increase in light components and a decrease in calorific value； ②Flame arrester clogged ； ③The amount of raw material is increased too quickly, while the gas supply cannot keep up. Treatment: ① Continue to increase the amount of gas fed into the furnace, and contact relevant parties to ensure the composition of the gas ； ②Replace the secondary line cleaning flame arrester ； ③Increase the raw material input slowly, raising the temperature first before increasing the amount of raw material.