HCBBS Forum (English)
Submit Chemical Projects / Find Solutions
Amplify Your Requirements on a Broader Chemical Platform *Engineering · Technology · Equipment · Solutions*
Submit Request

Sulfur Recovery Daily Question 2018.9.1

2018-09-02View Original

Thread Content

Question: State the important physical and chemical properties of sulfur dioxide. Answer: Sulfur dioxide is a colorless, toxic gas with a strongly pungent, suffocating odor and a bitter taste. Its molecular formula is SO2, and its molecular weight is 64.06. SO2 is easy to condense; it can be liquefied at normal pressure when cooled to -10°C, or at room temperature when the pressure is increased to 405.2 KPa. Therefore, SO2 can be used as a refrigerant. Its melting point is -76.1°C, and its boiling point is -10.02°C. At 20°C, one volume of water can dissolve 40 volumes of SO2 gas. The aqueous solution of SO2 forms sulfurous acid (H2SO3), which is a moderately strong acid; therefore, in the presence of water or water vapor, SO2 corrodes steel more easily than H2S. Moreover, the sulfurous acid formed in reaction with water is also slowly oxidized into sulfuric acid ; Soluble in ethanol, ether, chloroform, methanol, sulfuric acid, and acetic acid ; It is non-flammable and does not support combustion; the maximum allowable concentration in workshop air is 15 mg/m3.
Reply #22018-09-02
Sulfur dioxide is a colorless, toxic gas with a strongly pungent, suffocating odor and a bitter taste; its molecular formula is SO2 and its molecular weight is 64.06. SO2 is easy to condense – it can be liquefied at normal pressure when cooled to -10°C, or at room temperature when the pressure is increased to 405.2 KPa. Therefore, SO2 can be used as a refrigerant. Its melting point is 76.1°C, and its boiling point is 10.02°C. At 20°C, one volume of water can dissolve 40 volumes of SO2 gas. The aqueous solution of SO2 forms sulfurous acid (H2SO3), which is a moderately strong acid; therefore, in the presence of water or water vapor, SO2 corrodes steel more easily than H2S. Moreover, the sulfurous acid formed in reaction with water is also slowly oxidized into sulfuric acid ; Soluble in ethanol, ether, chloroform, methanol, sulfuric acid, and acetic acid ; It is non-flammable and does not support combustion; the maximum allowable concentration in workshop air is 15 mg/m3.
Reply #32018-09-02
Answer: Sulfur dioxide is a colorless, toxic gas with a strongly pungent, suffocating odor and a bitter taste; its molecular formula is SO2, and its molecular weight is 64.06. SO2 is prone to condensation
Reply #42018-09-02
Sulfur dioxide is a colorless, toxic gas with a strongly pungent, suffocating odor and a bitter taste; its molecular formula is SO2 and its molecular weight is 64.06. SO2 is prone to condensation – it can be liquefied at normal pressure when cooled to -10°C, or at room temperature when the pressure is increased to 405.2 KPa. Therefore, SO2 can be used as a refrigerant. Its melting point is -76.1°C, and its boiling point is -10.02°C. At 20°C, one volume of water can dissolve 40 volumes of SO2 gas. The aqueous solution of SO2 forms sulfurous acid (H2SO3), which is a moderately strong acid; therefore, in the presence of water or water vapor, SO2 corrodes steel more easily than H2S. Additionally, sulfurous acid formed in reaction with water is also slowly oxidized into sulfuric acid ; Soluble in ethanol, ether, chloroform, methanol, sulfuric acid, and acetic acid ; It is non-flammable and does not support combustion; the maximum allowable concentration in workshop air is 15 mg/m.
Reply #52018-09-02
Sulfur dioxide is a colorless, toxic gas with a strongly pungent, suffocating odor and a bitter taste; its molecular formula is SO2 and its molecular weight is 64.06. SO2 is prone to condensation – it can be liquefied at normal pressure when cooled to -10°C, or at room temperature when the pressure is increased to 405.2 KPa. Therefore, SO2 can be used as a refrigerant. Its melting point is -76.1°C, and its boiling point is -10.02°C. At 20°C, one volume of water can dissolve 40 volumes of SO2 gas. The aqueous solution of SO2 forms sulfurous acid (H2SO3), which is a moderately strong acid; therefore, in the presence of water or water vapor, SO2 corrodes steel more easily than H2S. Additionally, sulfurous acid formed in reaction with water is also slowly oxidized into sulfuric acid ; Soluble in ethanol, ether, chloroform, methanol, sulfuric acid, and acetic acid ; It is non-flammable and does not support combustion; the maximum allowable concentration in workshop air is 15 mg/m.
Reply #62018-09-02
Sulfur dioxide is a colorless, toxic gas with a strongly pungent, suffocating odor and a bitter taste; its molecular formula is SO2 and its molecular weight is 64.06. SO2 is easy to condense – it can be liquefied at normal pressure when cooled to -10°C, or at room temperature when the pressure is increased to 405.2 KPa. Therefore, SO2 can be used as a refrigerant. Its melting point is 76.1°C, and its boiling point is 10.02°C. At 20°C, one volume of water can dissolve 40 volumes of SO2 gas. The aqueous solution of SO2 forms sulfurous acid (H2SO3), which is a moderately strong acid; therefore, in the presence of water or water vapor, SO2 corrodes steel more easily than H2S. Moreover, the sulfurous acid formed in reaction with water is also slowly oxidized into sulfuric acid ; Soluble in ethanol, ether, chloroform, methanol, sulfuric acid, and acetic acid ; It is non-flammable and does not support combustion; the maximum allowable concentration in workshop air is 15 mg/m3.
Reply #72018-09-02
Sulfur dioxide is a colorless, toxic gas with a strongly pungent, suffocating odor and a bitter taste; its molecular formula is SO2 and its molecular weight is 64.06. SO2 is prone to condensation – it can be liquefied at normal pressure when cooled to -10°C, or at room temperature when the pressure is increased to 405.2 KPa. Therefore, SO2 can be used as a refrigerant. Its melting point is -76.1°C, and its boiling point is -10.02°C. At 20°C, one volume of water can dissolve 40 volumes of SO2 gas. The aqueous solution of SO2 forms sulfurous acid (H2SO3), which is a moderately strong acid; therefore, in the presence of water or water vapor, SO2 corrodes steel more easily than H2S. Additionally, sulfurous acid formed in reaction with water is also slowly oxidized into sulfuric acid ; Soluble in ethanol, ether, chloroform, methanol, sulfuric acid, and acetic acid ; It is non-flammable and does not support combustion; the maximum allowable concentration in workshop air is 15 mg/m.
Reply #82018-09-02
Sulfur dioxide is a colorless, toxic gas with a strongly pungent, suffocating odor and a bitter taste; its molecular formula is SO2 and its molecular weight is 64.06. SO2 is prone to condensation – it can be liquefied at normal pressure when cooled to -10°C, or at room temperature when the pressure is increased to 405.2 KPa. Therefore, SO2 can be used as a refrigerant. Its melting point is -76.1°C, and its boiling point is -10.02°C. At 20°C, one volume of water can dissolve 40 volumes of SO2 gas. The aqueous solution of SO2 forms sulfurous acid (H2SO3), which is a moderately strong acid; therefore, in the presence of water or water vapor, SO2 corrodes steel more easily than H2S. Additionally, sulfurous acid formed in reaction with water is also slowly oxidized into sulfuric acid ; Soluble in ethanol, ether, chloroform, methanol, sulfuric acid, and acetic acid ; It is non-flammable and does not support combustion; the maximum allowable concentration in workshop air is 15 mg/m.
Reply #92018-09-02
Sulfur dioxide is a colorless, toxic gas with a strongly pungent, suffocating odor and a bitter taste; its molecular formula is SO2 and its molecular weight is 64.06. SO2 is easy to condense – it can be liquefied at normal pressure when cooled to -10°C, or at room temperature when the pressure is increased to 405.2 KPa. Therefore, SO2 can be used as a refrigerant. Its melting point is -76.1°C, and its boiling point is -10.02°C. At 20°C, one volume of water can dissolve 40 volumes of SO2 gas. The aqueous solution of SO2 forms sulfurous acid (H2SO3), which is a moderately strong acid; therefore, in the presence of water or water vapor, SO2 corrodes steel more easily than H2S. Moreover, the sulfurous acid formed in reaction with water is also slowly oxidized into sulfuric acid ; Soluble in ethanol, ether, chloroform, methanol, sulfuric acid, and acetic acid ; It is non-flammable and does not support combustion; the maximum allowable concentration in workshop air is 15 mg/m.
Reply #102018-09-02
Sulfur dioxide is a colorless, toxic gas with a strongly pungent, suffocating odor and a bitter taste; its molecular formula is SO2 and its molecular weight is 64.06. SO2 is easy to condense – it can be liquefied at normal pressure when cooled to -10°C, or at room temperature when the pressure is increased to 405.2 KPa. Therefore, SO2 can be used as a refrigerant. Its melting point is 76.1°C, and its boiling point is 10.02°C. At 20°C, one volume of water can dissolve 40 volumes of SO2 gas. The aqueous solution of SO2 forms sulfurous acid (H2SO3), which is a moderately strong acid; therefore, in the presence of water or water vapor, SO2 corrodes steel more easily than H2S. Moreover, the sulfurous acid formed in reaction with water is also slowly oxidized into sulfuric acid ; Soluble in ethanol, ether, chloroform, methanol, sulfuric acid, and acetic acid ; It is non-flammable and does not support combustion; the maximum allowable concentration in workshop air is 15 mg/m3.
Reply #112018-09-02
Sulfur dioxide is a colorless, toxic gas with a strongly pungent, suffocating odor and a bitter taste; its molecular formula is SO2 and its molecular weight is 64.06. SO2 is prone to condensation – it can be liquefied at normal pressure when cooled to -10°C, or at room temperature when the pressure is increased to 405.2 KPa. Therefore, SO2 can be used as a refrigerant. Its melting point is -76.1°C, and its boiling point is -10.02°C. At 20°C, one volume of water can dissolve 40 volumes of SO2 gas. The aqueous solution of SO2 forms sulfurous acid (H2SO3), which is a moderately strong acid; therefore, in the presence of water or water vapor, SO2 corrodes steel more easily than H2S. Additionally, sulfurous acid formed in reaction with water is also slowly oxidized into sulfuric acid ; Soluble in ethanol, ether, chloroform, methanol, sulfuric acid, and acetic acid ; It is non-flammable and does not support combustion; the maximum allowable concentration in workshop air is 15 mg/m.

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.