Regarding the three-prevention measures for Tank Group
Thread Content
Now, the tank area is required to have measures for protection against fire, moisture, and corrosion; in addition, the fire roads outside the tank area are raised above the ground level of the tank area as a secondary preventive measure. Drainage in the secondary prevention and control area is for rainwater, while in the event of an accident it is used for sewage; should separate systems be established for clean water and wastewater drainage around the tank area?
Separation of clean and polluted water is necessary; in principle, rainwater at the beginning should first go into the sewage tank, and then into the initial rainwater tank
To confirm, the original practice for drainage outside the tank area and along the fire roads was to handle rainwater; after adding flood control measures, it is necessary to separate clean water from wastewater in the same way as inside the tank area.
To confirm, the original practice for drainage outside the tank area and along the fire roads was to handle rainwater; after adding flood control measures, it is necessary to separate clean water from wastewater in the same way as inside the tank area.