What method should be used for level measurement in a reaction kettle with stirring function?
Thread Content
The mixer speed is below 80 RPM; stable measurement of the liquid level inside the reactor is desired.
A guided-wave radar level gauge can be used to measure the liquid level in a reactor equipped with stirring functionality. Guided wave radar level gauges can provide stable and reliable level measurement under low-speed agitation. .
It is advisable to consider using a radar level gauge for measurement; this device can measure the liquid level stably in a stirred environment. .
When stirring in a reactor, it is advisable to use a radar level gauge installed at the pipe outlet. It is easy to install, does not cause any collisions, and is accurate.
Will using a waveguide for high viscosity affect its lifespan?
A differential diaphragm level gauge can be used (a single diaphragm is sufficient for reactors at atmospheric pressure, while a double diaphragm is needed for sealed reactors under pressure); alternatively, a weighing system can be employed as a whole (for materials with high viscosity)