Requirements for preparing a feasibility study report
Thread Content
Question: What level of detail should the flowcharts and layout diagrams in the feasibility study report achieve, for (renovation projects)?
Reach a level where construction drawings can be prepared, at least to the stage of preliminary design
In flowcharts, the deepest level is usually the PFD; the layout should be relatively accurate, with room for minor adjustments later on, as making many changes later will have a significant impact on the planning
The layout should be relatively accurate; the size of the equipment can be adjusted, and the process can be simplified. At the very least, the workflow must be feasible, as otherwise many changes later on will have a significant impact on the planning. If this project is not set to start any time soon,
This is done; now there’s also the need to prepare environmental impact assessments and safety evaluations, which is quite troublesome. Since the product specifications haven’t been finalized, the manufacturing process needs to be simplified. It’s best to have all the necessary documents ready and ask a design firm to help organize them for you.
This usually needs to be prepared by a design institute, and the biggest advantage is that it can pass the review; doing it on one’s own would be very troublesome.