Can a forklift lift goods?
Thread Content
In some work sites, where lifting equipment is not available, the forks of a forklift are used to attach ropes for lifting – is this compliant? If it complies, please indicate the basis; if it does not comply, are there any good solutions?
It is not compliant to lift heavy objects using the fork of a forklift along with a rope counterweight. The reason is determined based on the “operational requirements” provisions for lifting operations in GB30871 \"Safety Regulations for Special Operations\". Lifting operations have specific requirements for lifting equipment, rigging, and safety devices, and the situation described by the poster does not meet such requirements.
However, as a type of special equipment, a forklift is used to transport goods and free people from heavy physical labor; it also has the capability to lift heavy loads. Therefore, in my opinion, if certain safety measures are taken, forklifts can also be used for lifting operations in a limited environment, as long as they are not overloaded. For example, in areas where forklift operation is possible, when the structure of the objects to be lifted does not interfere with forklift operation, when the weight of those objects does not exceed the forklift’s carrying capacity, when sturdy hooks are installed on the forklift frame, and when the objects are tied in a manner that meets safety requirements
The question raised by the original poster is somewhat similar to the post by @DesertFish; the only difference is that forklifts are used to lift objects over a smaller range. https://bbs.hcbbs.com/thread-2951055-1-1.html
It should not be lifted using the front teeth, as there is a risk of it falling off. There is a lifting ring on the back side of the bucket, so lifting is possible; the instructions specify the allowable lifting weight. General lifting rules should be followed, and lifting at too great a height is not advisable
1. Non-compliant. 2. But it’s effective. 3. Although updates and improvements at the regulatory level have been slow, vehicle and equipment manufacturers across the country have seized this business opportunity by responding to the actual needs of their customers, and over the years they have continuously introduced products that combine forklift and crane functions. It completely makes up for the shortcomings of existing policies in terms of hardware, brings it to a legal and professional standard, and accelerates the convenience of handling operations.