List of violations in the construction industry: formwork support

Thread Content

1. No construction plan for the formwork work. 2. The construction plan for the formwork work was not approved as required. 3. No specific safety measures were taken regarding the method of concrete delivery. 4. The formwork support system was not designed and calculated in accordance with regulations. 5. The formwork support system did not meet the design requirements. 6. The spacing between columns was not in compliance with standards. 7. There were no pads at the bottom of the columns. 8. Horizontal supports were not installed as required. 9. The load placed on the formwork exceeded the design limits. 10. No safety measures were in place for work at heights. 11. No warning barriers were set up during formwork removal, nor were there any supervisors present. 12. Suspended formwork elements were not removed. 13. No inspection procedures were carried out for the formwork work. 14. No safety and technical instructions were provided before installing or removing the formwork. 15. No protective measures were in place for work holes and edges. 16. No isolation measures were implemented to prevent accidents during vertical cross-work