Inspection of the highest points in oil refining facilities
Thread Content
Ground inspections are relatively simple. I just want to know if inspection points have been set up at high locations such as the top of your tower, and how many times inspections are carried out per day
At the high points of oil refining units, such as the tops of towers, inspection points are also typically established to ensure the proper and safe operation of the equipment. The frequency of inspections may vary depending on the specific factory regulations and the importance of the equipment. Generally, inspections at these high points are scheduled at least once a day to monitor the equipment status and detect any potential problems. The specific number of inspections should be determined based on the refinery’s operating procedures and safety standards. .