Selection of materials for desulfurization towers and precautions for installing fiberglass reinforced plastic desulfurization towers

Thread Content

http://5b0988e595225.cdn.sohucs.com/images/20180116/21ec27741eed4b0a8d916c8aa678bd5a.jpeg Does a fiberglass desulfurization tower require a cement base? Many users are likely to see that at the bottom of a fiberglass desulfurization tower, there is usually a cement base. So what is the function of the cement base at the bottom of the desulfurization tower? In fact, the function of the concrete base is quite simple: due to the large size of the desulfurization tower, it is difficult to secure it during installation; therefore, a concrete base is placed at the bottom of the tower to help fix it in place. Some users have this question: Is it possible to install a desulfurization tower without constructing a cement base? Users who think this way are mainly motivated by time constraints. Because they were afraid that building a concrete base would take too much time. Whether a cement base is needed depends mainly on the model of the fiberglass desulfurization tower and the specific installation environment. However, it is best to build a concrete base for the desulfurization tower to stabilize its structure. The cement base used in the construction of fiberglass desulfurization towers has the following advantages. 1. It can improve the stability of the products manufactured by desulfurization tower producers, thereby enhancing the seismic performance of these products. It makes the desulfurization tower less prone to damage in the event of certain natural disasters. Geological disasters often occur in some areas, so it is important to enhance the stability of the detachment tower in such special environments. 2. Many data show that desulfurization towers without cement bases are prone to tilting to a certain extent under the prolonged exposure to wind and rain. Therefore, it is recommended that users have a cement base installed by the desulfurization tower manufacturer. Ensure the normal use of the product. What considerations should be taken when selecting materials for desulfurization towers? To ensure that these towers have a satisfactory service life, many details need to be taken into account when choosing materials. Experts from desulfurization tower manufacturers advise that these towers are subject to corrosion due to the corrosive nature of the flue gases, so corrosion resistance must be considered when selecting materials. The flue gases inside the towers are at high temperatures, so heat resistance is also an important factor to consider when choosing materials. Since the flue gases contain not only gases but also a large amount of dust, this dust can cause friction against the towers during processing, leading to wear and tear; therefore, the materials used in these towers must also have good wear resistance. Experts from manufacturers recommend that, in cases of geological changes or strong winds, the towers may experience shaking or deviations in angle. To prevent damage to fiberglass desulfurization towers, it is necessary that these towers possess adequate bending resistance. The materials used in these towers should also have good adhesion properties, so as to extend their service life and avoid issues such as cracking.