Load calculation for the catalytic stabilizer tower
Thread Content
I would like to know how to calculate the load of the absorption tower, given that its diameter is 2200 mm, the outlet for lean gas is 200 mm, the inlet for stabilized gasoline is 200 mm, there are two inlets for crude gasoline each with a diameter of 150 mm, the inlet for the middle section is 300 mm, the extraction outlet is 250 mm, the inlet for the second middle section is also 300 mm with an extraction outlet of 250 mm, the inlet for rich gas is 250 mm, and the outlet for the rich absorption oil is 300 mm. :handshake
To calculate the load on a tower, data on the components inside the tower is required; it isn’t as closely related to the size of the entrances and exits