Commissioning of glass panels for tower equipment
Thread Content
May I ask, what are the steps for putting glass panels into use in tower equipment?
What is the glass panel of tower equipment? ? Where are glass sheets used? ?
Is it a glass plate level gauge, or a sight glass?
Yes, it’s a glass plate level gauge
The operation steps are very simple: open the two cut-off valves at the top and bottom that connect the container to the glass plate, and then open the two valves of the glass plate level gauge. Then it is possible to see the level of the liquid inside the level gauge
Some manufacturers produce glass plate level gauges with stopcock valves
First, open the two cut-off valves at the top and bottom that connect the container to the glass plate, and then open the two valves of the glass plate level gauge as well, right? Is that how it’s done?
Yes, and then it’s possible to see the liquid level inside the container. For high-temperature and high-pressure media, the bolts need to be tightened, and the container should be opened slowly.
Okay, thank you. Is there a sequence for opening the upper and lower cut-off valves? Is there a sequence to opening the upper and lower valves of the level gauge?
Slowly open the upper valve of the level gauge shut-off valve, then open the lower valve; subsequently, slowly open the upper valve built into the level gauge, and then open the lower valve. If necessary, regular sewage discharge and cleaning should be carried out.