Find the permutation time of the tower
Thread Content
The tank’s nameplate indicates a capacity of 70 cubic meters, and the normal control liquid level is set at 60%. How can one determine the volume of oil? I would be grateful if experts could provide guidance
There are no large internal components below the liquid level, so the volume can be estimated as 42
The measurement range of the liquid level does not cover the entire height of the tower; therefore, a liquid level of around 60% corresponds to 60% of only a part of the tower. The calculation must be based on the measurement range of the level gauge
Yes, it depends specifically on the equipment drawings or the diagrams of the instrument measurement points; generally, the replacement volume should be 2-3 times that of the liquid level at the bottom of the tower to ensure proper circulation.
How to calculate the volume at 60% liquid level at the bottom of the tower? The tower is: 1900 (diameter) x 24300