Application areas of spray tower treatment pumps! ~

Thread Content

Application areas of spray tower treatment pumps: Acidic mist exhaust gas is introduced into the purification tower through air ducts; it passes through a packing layer, where it comes into full contact with sodium hydroxide absorption solution, allowing for absorption and neutralization reactions to occur. After being purified, the acidic mist exhaust gas is dehumidified and demisted using a demisting plate before being discharged into the atmosphere by a fan. The absorbent liquid is pressurized by a water pump at the bottom of the tower and then sprayed downward from the top of the tower, before finally returning to the bottom of the tower for reuse. The purified acid mist waste gas meets the emission requirements and is below the **emission standards. Spray tower treatment pumps are suitable for treating waste gases that are emitted continuously or intermittently. The process is simple, and management, operation, and maintenance are quite convenient and straightforward, without causing any impact on production in the workshop. They have a wide range of applications, enabling the purification of multiple types of pollutants, and exhibit low pressure drops.