Problems with machine pump lubricating oil
Thread Content
Is the oil level in the oil cup appropriate? Is the quality of the lubricant appropriate?
In this lubrication method, the oil level is determined using an oil sight glass, with a level of ½ to 2/3 being appropriate; the oil reservoir serves as a means for automatic oil replenishment – it simply needs to be refilled when it’s empty.
Half to two-thirds of the oil cup is sufficient~~~
This method of applying lubricant is quite straightforward and good.
In this lubrication method, the oil level should be kept at 1/2–2/3 as indicated by the oil sight glass; the oil cup serves as a means for automatic refilling – simply fill it up when it’s empty. Agree with the above statement
What problem are you talking about? It wasn’t explained clearly.
The oil level is appropriate; the color of the second oil is slightly darker, probably due to prolonged use.
The lubricant level should be between 1/2 and 2/3; it should be transparent and shiny in color, and it needs to be replaced if it turns black
Agree: The lubricant level should be between 1/2 and 2/3; it should be transparent and shiny, and it needs to be replaced if it turns black