Steps for starting and stopping a pneumatic pump
Thread Content
Let me explain the steps for starting and stopping a pneumatic pump
This post was last edited by ylb913 on 2018-8-23 at 12:14. Only a small air pump was used; the inlet and outlet pipes were connected, power air was supplied, the air valve was opened, and the opening degree of the valve was adjusted according to the pump’s output speed. There are no valves at the pump inlet and outlet.
Open the inlet and outlet valves, start the gas supply and adjust it to the appropriate level, then turn off the gas supply and close the inlet and outlet valves. Based on the principle of positive displacement pumps.