What is the reason why the Roots blower cannot aerate?

Thread Content

We all know that Roots blowers are widely used in sewage treatment. During use, I believe many people have encountered when the Roots blower cannot aerate or the aeration volume is insufficient. What is going on? Please see the following points: 1. Wrong selection. If the pressure is insufficient during selection, or the volume of sewage treated is larger than the actual selection, it will lead to selection errors and insufficient aeration. ； 2. The aeration disk is clogged. In sewage treatment, the aeration disk is easily clogged. If the aeration disk is heavily clogged during use, the aeration volume will be reduced or the aeration will not come out. 3. Roots blower failure: After the Roots blower has been used for a long time, the various parts will age and corrode, which will cause various minor problems, such as aeration problems. 4. Pipeline reasons During the use of Roots blower sewage pool aeration, if the pipes are blocked or damaged, the aeration amount will be affected. Also, if the pipeline is too long or there are too many bends, it will also affect the aeration amount. The above are some reasons why the Roots blower has insufficient aeration. After discovery, it needs to be dealt with promptly. If you have any questions, you can contact the manufacturer at any time to avoid unnecessary losses. The above content may not be reproduced or borrowed without permission!