Four-in-one furnace gas generation system; the flow rate of the steam drum circulation water pump is adjusted based on that parameter
Thread Content
Four-in-one furnace gas generation system; the flow rate of the steam drum circulation water pump is adjusted based on that parameter
The main goal is to ensure that there is medium in each channel within the evaporation section; a low flow rate can lead to dry burning of the furnace tubes, while a high flow rate results in high energy consumption and unnecessary waste. Adjustments are made based on the designed flow rate!
I saw someone on the Haichuan forum mention it before； The term \"circulation ratio\" – what is the relationship between the circulation ratio of a drum and the steam produced, and what is the typical value for this circulation ratio? Theoretically, the forced circulation should be no less than 20, and natural circulation no less than 40; in practical operation, the minimum value for forced circulation is 15
Oh, thank you. I’ll look up some information on this topic
Each time the reaction temperature drops, the flow rate at the outlet of the boiler circulation water pump increases
Each time the reaction temperature drops, the flow rate at the outlet of the boiler circulation water pump increases
Each time the reaction temperature drops, the flow rate at the outlet of the boiler circulation water pump increases