A plunger metering pump
Thread Content
A plunger metering pump, but the relevant drawings and animations cannot be found on the Internet, and the archives are not complete. Is there anyone who uses this kind of metering pump? Please share the information. The conveying medium is mixed xylene, the conveying medium temperature is 245°C, and the conveying pressure is 0.4MPa.
Which pump? What's unique about it?
There can't be no information on this pump, right? Is there no information on the nameplate?
I'm a technology major. To be honest, I couldn't find the random drawing of this pump. I only had some parameter information, such as material, power, flow rate, etc... I couldn't find such a plunger pump drawing on the Internet, so I wanted to ask if anyone uses this type of plunger pump.
Those with bad cervical vertebrae can't even see your picture: L This is a plunger metering pump with a remote pump head, and the pipeline between the remote pump head and the plunger has a cooling jacket. The main reason is that the medium is too hot and is hit directly, and the high temperature is easily transmitted to the driving end.
The temperature of the medium is quite high. The pump head is usually customized according to the customer's requirements. There is basically no information on the Internet.
The inlet pipe doesn't even have a support. six
Hello, teacher, what is the function of this?
Lubricant cup interface, but where to lubricate it?