HCBBS Forum (English)
Submit Chemical Projects / Find Solutions
Amplify Your Requirements on a Broader Chemical Platform *Engineering · Technology · Equipment · Solutions*
Submit Request

Comparison Table of Illegal Acts, Rectification Measures, and Penalties under the Special Equipment Safety Law

2022-06-12View Original

Thread Content

Special Equipment Safety Law: Legal responsibilities of responsible parties, provisions violated, legal consequences, measures for rectifying illegal activities, and penalties. For units engaged in illegal production: 1874 – Engaging in the production (design, maintenance) of special equipment without permission; such activities must be halted immediately. The unit is ordered to cease operations, its illegal equipment is confiscated, and a fine of 100,000 to 500,000 yuan is imposed, in addition to the confiscation of any illegal profits; In the case of illegal installation, orders shall be issued to restore the original condition, or to have it reinstalled by a qualified entity within a specified time frame. Carrying out activities related to the production (design, maintenance) of special equipment beyond the scope permitted. Manufacturers who produce special equipment without approved design documents are ordered to cease such production; the equipment in question is confiscated, and a fine of 50,000 to 500,000 yuan is imposed. Special equipment that is manufactured without undergoing type testing must stop being produced, and the manufacturers are required to make corrections within a specified time frame ; If the violation is not corrected within the specified time, a fine of 30,000 to 300,000 yuan will be imposed. 2177: When special equipment leaves the factory, it must be accompanied by the relevant technical documents and materials as required by safety technical specifications; such documents and materials must also be provided in accordance with TSG requirements, and corrective action must be taken within a set time limit ; If the violation is not corrected within the prescribed time, the party shall be ordered to cease manufacturing and selling, fined between 20,000 and 200,000 yuan, and any illegal gains shall be confiscated. 1881-1 no longer meets the production requirements; it must be corrected to meet those requirements before production can resume; a deadline has been set for making these improvements ; If the violation is not corrected within the prescribed time, production shall be ordered to cease, and a fine of 50,000 to 500,000 yuan shall be imposed ; In serious cases, the production license shall be revoked. The production license has expired; production must cease if it is carried out beyond the scope permitted by the license. Altering, selling, leasing, or lending the production license is also prohibited; production must be halted, and a fine of 50,000 to 500,000 will be imposed ; In serious cases, the license shall be revoked. For those engaged in the production, sale, and delivery of **special equipment that has been explicitly banned**, such activities must be halted; the equipment in question shall be confiscated along with any illegal profits, and a fine of 30,000 to 300,000 yuan shall be imposed. The installation unit, 2378, commenced construction without providing written notice to the department responsible for the safety supervision and management of special equipment; it was required to submit a written report to the Haikou Market Regulation Bureau for rectification within a specified time frame ; If the violation is not corrected within the specified time, a fine of 10,000 to 100,000 yuan will be imposed. 24: Relevant technical documents and records must be handed over to XX within 30 days after the installation and acceptance of special equipment. 25: Supervisory inspections must be carried out in accordance with the requirements of safety technical specifications; corrective actions must be taken within a set time limit ; If the violation is not corrected within the prescribed time, a fine of 50,000 to 200,000 yuan shall be imposed, and the illegal gains shall be confiscated ; In serious cases, the production license shall be revoked. The boiler cleaning process was not carried out in accordance with the requirements of safety technical specifications. The selling entity 2782-1 is responsible for selling special equipment that was produced without a license, that has not been inspected, that failed inspection, or that is obsolete or scrapped; such activities are prohibited. The equipment in question as well as any illegal profits obtained shall be seized, and a fine of 30,000 to 300,000 yuan will be imposed. 82-2: If the selling unit fails to establish a system for inspecting, accepting, and keeping records of special equipment sold, it shall be ordered to make corrections; a fine of 10,000 to 100,000 yuan will be imposed. 82-3: If the manufacturing unit sells or delivers special equipment that has not been inspected or has failed inspection, it shall cease its business operations; the equipment in question shall be confiscated, and a fine of 30,000 to 300,000 yuan shall be imposed, in addition to the confiscation of any illegal profits ; In serious cases, the production license shall be revoked. For rental units: 2882-1 – Those that rent out special equipment that has been produced without permission, that has not undergone inspection, that fails inspection, or that is obsolete or scrapped shall be forced to cease their operations; such equipment along with any illegal profits obtained will be confiscated, and a fine of 30,000 to 300,000 yuan will be imposed. For units that produce, operate, or use such equipment: 13-286-1 – Those that fail to assign personnel with the appropriate qualifications for the management and inspection of special equipment, or that do not have qualified personnel for these tasks, must make corrections within a specified time frame ; If the violation is not corrected within the prescribed time, the party shall be ordered to cease using the equipment or suspend operations for rectification, and shall be fined between 10,000 and 50,000 yuan. 1486-2: Using personnel without the appropriate qualifications for the safety management, inspection, and operation of special equipment; using personnel with the appropriate qualifications for such tasks. 13-286-3: Failing to provide safety education and skill training to those responsible for the safety management, inspection, and operation of special equipment; providing such education and training instead. 61-1/295-1: Refusing to undergo supervision and inspection; if no correction is made after being ordered to do so, the entity shall be ordered to suspend operations for rectification, along with a fine of 20,000 to 200,000 yuan. 61-3/495-2: Illegally using, transferring, damaging, or altering sealed or seized special equipment and its key components; an order to make corrections is issued, along with a fine of 5,000 to 200,000 yuan ; In severe cases, the production license shall be revoked and the use registration certificate shall be cancelled. Unit 3383 has failed to obtain a registration certificate; it is required to go to the Registration Approval Office of Haikou Market Regulation Bureau (Haikou Government Service Center) to obtain such a certificate within a specified time limit ; If the corrections are not made by the deadline, use shall be ordered to cease, and a fine of 10,000 to 100,000 yuan shall be imposed. 35: No safety technical records have been established, or the existing safety technical records do not meet the requirements; safety technical records should be established as required. 33/40: Registration for use and marks for regular inspections have not been set up as required; such registration and marks should be in place. 39: Regular maintenance and periodic self-inspections of XX have not been carried out; regular maintenance and periodic self-inspections of XX are necessary. Regular calibration of safety accessories has not been performed; safety accessories should be calibrated regularly. 40-1: Inspections and assessments have not been carried out in accordance with the requirements of safety technical specifications; inspections and assessments should be conducted as required by these specifications. 44: Boiler water (medium) treatment has not been carried out as required; boiler water (medium) treatment must be done as specified. 69-3: No special emergency plan for special equipment accidents has been formulated; a special emergency plan for such accidents should be developed. 32-184: Use of special equipment that was produced without a license or that has not passed inspection – a fine of between 30,000 and 300,000 yuan. 40-3: Use of special equipment that has not been inspected or that has failed inspection. 32-2: Use of special equipment that has been explicitly ordered to be retired or that is already scrapped. 42: In the event of malfunctions or abnormalities, thorough inspections to eliminate potential hazards are not carried out, and the equipment continues to be used; the equipment must not be used until such inspections and hazard elimination are completed. 48-1: The obligation to retire the equipment according to law has not been fulfilled, nor have the procedures for canceling the registration certificate been carried out; the obligation to retire the equipment according to law must be fulfilled, along with the cancellation of the registration certificate. 48-161-3: Special equipment that does not meet the requirements of safety technical specifications or has serious accident hazards (referring to hardware) – seizure and confiscation for up to 30 days. 48-261-4: Use or sale of special equipment that has reached the retirement stage or that is already scrapped – licensed filling units are involved. 4985-1: Inspection and recording procedures before and after filling have not been implemented as required; such procedures must be followed. A order to make corrections is issued, along with a fine of between 20,000 and 200,000 yuan ; In serious cases, the filling license shall be revoked. Filling mobile pressure vessels and gas cylinders that do not comply with TSG standards; filling mobile pressure vessels and gas cylinders that do comply with TSG standards. The entity in charge of such filling, 85-2, engaged in such activities without authorization – filling of mobile pressure vessels and gas cylinders was halted, and the gas cylinders were confiscated; penalty: 10
Reply #22022-06-12
Senior, my page is showing garbled characters. Why?

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.