[Roll up your sleeves and engage in environmental protection] 012 The most stringent environmental inspection in history. What about the inspection aspects?

Environmental protection supervision and law enforcement mainly inspects these aspects when going to enterprise sites.: 1. Enterprises must not obstruct environmental supervision and environmental protection judicial interpretations: Article 4: Anyone who commits criminal acts stipulated in Articles 338 and 339 of the Criminal Law and falls under any of the following circumstances shall be severely punished: Obstruction of environmental supervision and inspection or investigation of environmental emergencies does not constitute a crime such as obstructing official business. ； 2. Complaints about corporate environmental protection issues Complaints about environmental protection issues from relevant enterprises and institutions are based on letters from the public received by environmental protection departments at all levels. Solve the environmental protection issues that the people are increasingly concerned about and solve them within everyone's reach. Is there illegal discharge of waste gas, waste water, illegal disposal and transfer of (hazardous) solid waste? ； Whether the noise disturbs residents. Are the pollution control facilities simple and old? Can they meet emission standards? 3. Judicial Interpretation of the Two High Environmental Protection Regulations for Sewage Inspection: Article 8: violation * * It stipulates that those who discharge, dump, or dispose of pollutants containing toxic, radioactive, infectious disease pathogens, and other substances that simultaneously constitute the crime of environmental pollution, the crime of illegal disposal of imported solid waste, the crime of releasing dangerous substances, etc., shall be convicted and punished in accordance with the provisions of heavier penalties. 4. Exhaust gas pollution inspections follow the Party and * * , the people's concern about smog, exhaust gas is becoming more and more important, and it is also the first focus of environmental protection inspections at all levels. The exhaust gas is not only discharged to meet the standard, but also reduces pollutants and implements pollution control measures as much as possible. Check the operating status, historical operation status, processing capacity and processing volume of exhaust gas treatment facilities. 1. Inspection of exhaust gases generated by combustion of boilers, petrochemicals, chemical industries, etc. ① Check whether the continuous flammable organic waste gas generated by chemical, petrochemical and other enterprises is reasonably treated by recycling or incineration, and whether the incineration, adsorption or combined process of flammable organic waste gas produced intermittently is reasonable. ② Inspection procedures and performance indicators of boiler combustion equipment, inspection of the operating status of combustion equipment, inspection of sulfur dioxide control, and inspection of nitrogen oxide control. ③ Process waste gas, dust and odor pollution sources ④ Check whether waste gas, dust and odor emissions meet the requirements of relevant pollutant emission standards ； ⑤ Check the recycling status of flammable gases ； ⑥ Check the environmental protection measures for transportation, loading, unloading, and storage that can emit toxic and harmful gases and dusts ； 2. Air pollution prevention and control facilities ① Dust removal, desulfurization, desulfurization, and other gaseous pollutant purification systems ② Exhaust gas emission outlets ③ Check whether the polluter has built a new exhaust pipe in an area where the installation of new exhaust pipes is prohibited ； ④ Check whether the height of the exhaust pipe meets the * * or local pollutant emission standards ； ⑤ Check whether the sampling holes and sampling monitoring platform are installed on the exhaust gas exhaust pipe. ⑥ Check whether the exhaust port is set according to the required specifications (height, sampling port, signboard, etc.), and whether the required exhaust gas is installed and practical online monitoring facilities are installed in accordance with the environmental protection department. 3. Unorganized emission sources ① For emission points that emit toxic and harmful gases, dust, and smoke in an unorganized manner, if conditions permit organized emission, check whether the pollutant-discharging unit has carried out rectification and implemented organized emission. ； ② Check the dust in the coal yard, material yard, cargo and construction production process, and whether measures to prevent and control dust pollution have been taken or dust prevention equipment has been installed as required ； ③ Monitor at the enterprise boundary to check whether unorganized emissions comply with relevant environmental protection standards. 5. Inspection of sewage pollution control 1. Environmental monitoring of water pollution sources: Monitor the operating status, historical operation, processing capacity and water volume of sewage treatment facilities, quality management of wastewater, treatment effects, sludge treatment and disposal. Whether to establish a wastewater facility operation ledger (sewage treatment facility opening and closing time, daily wastewater inlet and outlet volume, water quality, dosing and maintenance records). )2. Sewage discharge outlet supervision and inspection: check whether the location of the sewage discharge outlet complies with the regulations, check whether the number of sewage discharge outlets of the polluter meets the relevant regulations, check whether the relevant pollutant discharge standards and regulations have been set up for monitoring sampling points, and check whether a standardized flow measurement section is set up to facilitate the measurement of flow rate and flow rate. The main sewage outlet must be equipped with environmental protection signs, etc. Whether online monitoring and monitoring equipment are set up as required. 3. Discharge review ① If there are flow meters and pollution source monitoring equipment, check the operation records ； ② If there is a water supply device or a water consumption certificate, the drainage volume will be calculated based on the water consumption. ； ③ If there is no measurement number and valid water consumption certificate, please refer to * * Relevant standards and manuals give estimates of the number of water drainage systems for similar enterprises. 4. Discharge water quality ① Check whether the quality of discharged waste water is sufficient * * or the requirements of local pollutant emission standards. ② Check the models and specifications of monitoring instruments, meters, and equipment as well as their calibration and calibration status. ③ Check the monitoring and analysis methods used and the water quality monitoring records. On-site monitoring or sampling can be carried out if necessary. ④ Check the diversion situation of rainwater and sewage, and check whether the sewage discharge unit implements the diversion of clean sewage and rainwater sewage. 6. Sewage pollution control supervision 1. Environmental supervision of water pollution sources 2. Supervision of sewage discharge outlets 3. Review of discharge volume 4. Discharge water quality ① Check whether the quality of discharged wastewater is sufficient * * or the requirements of local pollutant emission standards. ② Check the models and specifications of monitoring instruments, meters, and equipment as well as their calibration and calibration status. ③ Check the monitoring and analysis methods used and the water quality monitoring records. On-site monitoring or sampling can be carried out if necessary. ④ Check the diversion situation of rainwater and sewage, and check whether the sewage discharge unit implements the diversion of clean sewage and rainwater sewage. 5. Accident wastewater emergency treatment facilities Check whether the accident wastewater emergency treatment facilities of the sewage discharge enterprise are complete and whether they can ensure the interception, storage and treatment of wastewater generated when environmental pollution accidents occur.

Today, PM2.5: more than 400:L

For emission points that emit toxic and harmful gases, dust, and smoke unorganized, if conditions permit organized emission, check whether the pollutant-discharging unit has carried out rectification and implemented organized emission. This has always been strictly investigated

It just depends on the effect of the treatment. I feel it is quite bad.

Each inspection is known as the "most severe in history", and history is writing a new chapter every day.

The problems are all very bad. The key is to see how to rectify them, how strong the rectification is, and whether it has any effect. Will there be a situation where the inspections are more stringent each time, but the results are about the same every time?