Syngas compressor
Thread Content
Could you ask a friend to provide information on the price and power consumption of a syngas compressor with a capacity of 60,000 cubic meters per hour (standard), an inlet pressure of 0.1 MPa, and an outlet pressure of 4.5 MPa? Additionally, what is the difference in power consumption required to compress syngas at an outlet pressure of 4 MPa compared to the power needed for grinding and compressing pulverized coal in a coal pulverization press? Thank you! ! ! ! !
Too few parameters to calculate. You can provide the relevant operating parameters as required by API617, such as inlet and outlet pressures, temperature, and flow rate
The inlet pressure is 0.1 MPa, the flow rate is 60,000 standard cubic meters, and the temperature is 35 degrees; the outlet pressure is 4.0 MPa. The gas in question is syngas produced as a result of gasification.
The most commonly used type for syngas production is a three-stage piston machine; you can ask manufacturers such as SHENGU to help with the calculations. The conditions you provide at the moment aren’t very favorable, but those who work with ammonia synthesis should be able to figure it out more or less