Can someone solve the following technical problem?
Thread Content
We are in the silicone industry, and as a by-product we generate a slurry that is a solid-liquid mixture; the solid component is fine silicon powder, while the liquid component is methylchlorosilane, which has a high boiling point, is flammable and explosive, and releases hydrogen chloride gas when it comes into contact with water – a gas that is highly irritating. This material is stored in a horizontal tank with a volume of 3 cubic meters, with dimensions of 1200*3000; there is a DN300 port at each end. Is there a good way to remove this material smoothly? It is necessary to ensure safety and environmental protection.
Centrifuges generally generate heat and can pose risks; it is recommended to use a filter to remove the silicon powder.
Is the DN300 port flanged and sealed shut? Is there an inlet on top? Connect the reducer, valves, and hoses, then insert them into a plastic ton barrel; use a forklift with a capacity of over 5 tons to lift it smoothly and let it flow by gravity.
Production technologies for nitrogen trifluoride, tungsten hexafluoride, and trifluoromethanesulfonic acid fuhuagong6@163.com