Reasons for the short-term increase in pressure difference in the cyclone separator
Thread Content
This post was last edited by xuqinger on 2015-7-15 at 15:25; 10 Kpa was added every 8 hours
Check if there is any blockage or too much slag accumulation. Pressure and temperature also need to be checked. . . . . . . . . .
There are signs of blockage; reduce the feed rate and resume normal feeding once the pressure difference is normal, or try tapping the separator with a hammer.
This post was last edited by xuqinger on 2015-7-15 at 15:26 to check if there is an impact from water, and what the changes in outlet temperature are Analyze the changes in the opening degree of the black water ball valve to draw a comprehensive judgment; also determine whether there is a blockage, and if so, whether it is at the mixer or at the outlet of the upper synthesis gas pipeline Because petroleum coke is used as a fuel, there is a significant amount of light ash, which can potentially cause blockages at certain elbows with varying diameters