Looking for a filter that is resistant to high temperatures and acid corrosion……
Thread Content
Acidic slurry, containing impurities (only particles larger than 1 cm need to be filtered out); temperature around 100 degrees. Most of what I’ve seen is made of stainless steel, which isn’t suitable. I’m not sure if there are options made of PP or F4 material; those who know this information could please share it with me. Thank you
Filters made of PTFE can be used; they are resistant to high temperatures and corrosion
Grains larger than 1cm? Is it wrong, 1mm? The quick-install filter coated with PTFE can handle a maximum operating temperature of 100 degrees; it’s very useful.
The temperature of the PP filter probably can’t reach 100°C; an F4 filter could be considered, but its price will be relatively high.
It is confirmed to be 1 cm, as there is a heat exchanger below; the particles are too large and numerous, often causing blockages
Ceramic filters – so many models available
This post was last edited by *lihuagong on 2015-8-19 09:04. Fluorinated filter works fine! We have it in our factory. How large do you need? Fluoroplastics include F4, F46, and PFA. Contact me via message if needed
Do valve manufacturers also make filters now?
Plastic at 100°C won’t work; fluorinated lining can be considered