Coke center temperature
Thread Content
Is there a good way to measure the temperature at the center of the coke cake?:P
There’s no good way; we measure the out-of-focus cake on the focusing grid!
Are you using an infrared thermometer or something else? {:1_90:}
Is there a good method for measuring the core temperature of coke cakes, before pushing it out? Middle? Measurement
As the height of the carbonization chamber increases, it becomes increasingly difficult to use traditional methods for measuring the temperature at the center of the coke cake. Therefore, new technologies and methods need to be adopted. The automatic heating system of the 7.63-meter coke oven uses temperature sensing elements installed at the tips of the coke pushing rods to measure the temperatures of the furnace walls on both sides of the carbonization chamber during the coke pushing process, and a mathematical model is established to enable control over the temperature of the coke oven body!
Coke ovens of 4.3 and 5.5 don’t have that configuration :(
4.3-meter coke ovens can use the traditional method of inserting coke cakes, which requires high labor intensity!
4.3 and 5.5 work too; it’s sufficient to install a temperature measurement device on the focusing grid