【Daily Question】Chemical Engineering Principles 143: Finned Tube Heat Exchangers (August 16)
Thread Content
The Chemical Engineering Theory section is launching the \"One Question per Day\" campaign starting today, aimed at helping everyone reinforce their basic knowledge in chemical engineering. Subsequent series will include those on \"Principles of Chemical Engineering,\" \"Mass Transfer and Separation,\" \"Thermodynamics in Chemical Engineering,\" and \"Chemical Process Engineering.\" We hope for your active support! Answers to the questions in the \"One Question per Day\" campaign can be viewed directly by replying to the post, and the topic will be closed after 1 day ! You get 2 wealth points for participating, and an additional 3 wealth points if you answer correctly~~~ Multiple-choice question: The fins of a finned tube heat exchanger should be installed at ( ). A. The side with the smaller α B. The side with the larger α C. Inside the tube D. Outside the tube A
The fins of a finned-tube heat exchanger should be installed on the side with (A. the smaller α value).
Study*study*, I guess one should choose A
B. the larger side of A. ----------------
Right, A? I guessed it; I’m not sure if it’s right or wrong
The fins of a finned-tube heat exchanger should be installed at (A). A. The side with the smaller α B. The side with the larger α C. Inside the tube D. Outside the tube
The fins of a finned-tube heat exchanger should be installed at ( ). B. The side with the larger α
The fins of a finned-tube heat exchanger should be installed at (A). A. The side with the smaller α B. The side with the larger α C. Inside the tube D. Outside the tube