Friends, what are the operating standards for electric tar collectors? What voltage and current are required?
Thread Content
Is the voltage requirement 40KV and the current 1000mA? Is it only the voltage that is required and not the current, or is it only the current that is required and not the voltage? How is it performing? How much tar is contained in the exported gas?
It’s not a situation where only voltage is required and current is not, or vice versa; rather, it’s about assessing the tar-removal effect. If this effect does not meet the standards, then the voltage needs to be increased, and of course, the current also needs to be adjusted.
It is difficult to take gas samples for tar analysis, of course with the aim of achieving the best efficiency permitted by the equipment. @Saying 998543 is the same as not saying anything. Tell me, currently the tar content at the outlet of the electrostatic precipitator is 25 mg/m3, with an electrostatic precipitator voltage of 32 KV and a current of 400 mA. What do you think should be adjusted?
I’m not sure. You can consult our company’s technical staff at Xiangyang Xian Tian Xia Environmental Protection
I’m not sure. You can consult our company’s technical staff at Xiangyang Xian Tian Xia Environmental Protection